*** JEEP CHRYSLER DODGE *** STARTER INHIBITOR VALUE km

[norbisko]

Has anyone successfully reset the km value for "starter inhibitor" found in FCA cars in PCM-Live data.

Tired battery reset, still shows original value
I used autel maxisys elite , tried all resets available , nothing would reset this value.

[angelo44]

Hey - did u solve this? Wondering if u tried the Dodge PCM reset procedure:

1. Buckle driver seat belt
2. Remove PCM fuse
3. Put in key and turn it to START, not run, and hold it there until you hear 2-3 chimes
4. Remove key, replace fuse, close hood, unbuckle seat belt
5. Start and read PCM stats again...


A dealer soft reflash may also help.

A

[norbisko]

Hey - did u solve this? Wondering if u tried the Dodge PCM reset procedure:

1. Buckle driver seat belt
2. Remove PCM fuse
3. Put in key and turn it to START, not run, and hold it there until you hear 2-3 chimes
4. Remove key, replace fuse, close hood, unbuckle seat belt
5. Start and read PCM stats again...


A dealer soft reflash may also help.

A

Hey,
I was never able to. I dont have dealer soft for that year,

Never tried your suggestion, as the car left long time ago.

Will try on the next one.

Thank You

[Berubeg]

Start engine, unplug throttle body stop engine and start again. Plug the throttle body and confirm the value. Done again one today

[norbisko]

Start engine, unplug throttle body stop engine and start again. Plug the throttle body and confirm the value. Done again one today
will try on the next one. and confirm

Thanks for a tip

[nickolasd]

this method works on older Chrysler's, tested on 17 and newer doesn't work.


Start engine, unplug throttle body stop engine and start again. Plug the throttle body and confirm the value. Done again one today