View Full Version : BMW motorbike dash eeprom 35080
PowerPlus
25th July, 2020, 05:44 PM
hi
can someone help to extract the actual milage km from eeprom 35080 ?
and set milage to 13500km please
it an VDO Dash A2C53112831
thanks
jomberykaso
25th July, 2020, 06:29 PM
Original mileage could be 418464 kms or 209232 kms
PowerPlus
26th July, 2020, 02:03 AM
can set edit to 13500 km please?
robert1232
26th July, 2020, 10:34 AM
209232km to 13500km
raport here
hi
can someone help to extract the actual milage km from eeprom 35080 ?
and set milage to 13500km please
it an VDO Dash A2C53112831
thanks
PowerPlus
26th July, 2020, 04:43 PM
thank you but i can not write file, it show error verify , i think file is not ok
clusters
26th July, 2020, 04:51 PM
The file is fine, you need to erase the top two lines first with something like R270, Craprog cannot do it.
And you have to do the ECU as well or you will get blinking mileage.
stoyanov
26th July, 2020, 04:55 PM
thank you but i can not write file, it show error verify , i think file is not ok
Did you erase eeprom before writing,file ok or not ok doesn't matter there.
salkapone
3rd August, 2020, 03:22 PM
is supose tht u dont have tool for erase 35080w6
use brand new eprom, and write dump from previos post...
PowerPlus
13th August, 2020, 02:44 AM
hi again
the original speedometer DISPLAY broke, in attachment is readout
i bought a new speedometer (used), i can not change only Display , because cable is diffrent.
the new buyed dash is working but shows wrone millage/km
my question is, is inside dump also VIN and nessary datas to swap, or is it enough only change millage in new dash .
both readout is in attachment
i need milage from original dash , to new buyed dash please
PowerPlus
14th August, 2020, 12:07 PM
can someone take a look inside fille please
PowerPlus
16th August, 2020, 01:29 PM
bump bump can someone help
mobinec
16th August, 2020, 08:54 PM
your file.....13488km
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.