Renault ecu tool 2.98

[godfathertre]

Can somebody explain when
We use this
Feature on new software
AES CRYPTO_KEY calculation from PINCODE for Dacia 2012+/Clio IV/Trafic III/Master IV/Twingo III

[TERMINATOR1000]

Can somebody explain when
We use this
Feature on new software
AES CRYPTO_KEY calculation from PINCODE for Dacia 2012+/Clio IV/Trafic III/Master IV/Twingo III


This function is not for us ! Developer just show to other developer ( AVDI Lonsdor AUTEL OBDSTAR ) that he can program used BCM , 2016+keys ..... but for 500€ he wan't ( https://www.emulatorshop.com/devices-En/renault-ecu-decoding-tool-en )
For use it you need 1°)PIN code + 2°)AES TAG-KEY programmer
1°) need to flash BCM ( maybe an risky job for RET ? they delete Trafic 3 key learning to 2.93 update )
2°) 1500€
for conclude , i'm ready to pay for an new tool , but if nothing move i will bought Lonsdor AUTEL just for new 2016+ Renault

[Ecuprog31]

Crypto key calculation from pincode ???
if we have pincode we don’t need anything to learn key
this option is useless

[TERMINATOR1000]

Crypto key calculation from pincode ???
if we have pincode we don’t need anything to learn key
this option is useless

Yes , you don't test this function yet ?
It's just for glory , they show that they can made " dealer key " ...

[RIMKACHIP]

Good but why they don’t include twingo3 and trafic 3 aes key programming !! ?? If they will add this option it will be good.


Envoyé de mon iPhone en utilisant Tapatalk

[TERMINATOR1000]

Good but why they don’t include twingo3 and trafic 3 aes key programming !! ?? If they will add this option it will be good.


Envoyé de mon iPhone en utilisant Tapatalk

For me , it's the time to read/write D-flash & risk to erase them , 20 min , for me it's an problem & i never take the risk if i don't have original CanClip + renault.net for repair an crashed BCM ...

Trafic 3 & Twingo 3 will use AVDI method , need to made dealer key + "easy" read PIN code after viginize it ( same method they using for 2016+ Clio 4 )

Megane 4 , Kadjar , Trafic 3 & Twingo 3 need AES tag-key programmer , it's actually the R.E.T problem ...

AES tag-key programmer cost is under 100$ , just need to be integrated to R.E.T ( like this https://diagcode.com/renaultusb/ )

[kostin]

It will be also good to add Logan&Sandero Visteon UCH

[figani]

Good but why they don’t include twingo3 and trafic 3 aes key programming !! ?? If they will add this option it will be good.



Before 2 or 3 months, last time I asked them in support...
Answer was: it will be released fast...
But what this fast means, don't know...
I'm also waiting for Twingo 3/Smart 453...

[Catalizator]

wait for the anniversary version 3, maybe it will contain new modules for working with the latest available cars

[TERMINATOR1000]

wait for the anniversary version 3, maybe it will contain new modules for working with the latest available cars

waiting .... the problem is that the new cars are easiest than old cars & OBDSTAR already made Megane 4 cards programming since 18 months !!!!
if Chinese beat it on Renault , VAG , EU cars ; this is the end of EU tools .
In France , demand of 2017+ Cars represent one job / month , it's not an emergency update , buy another tool ( lonsdor autel obdstar ) just for Megane 4 Twingo 3 is not reliable for me because i have better covering with my other tools , i prefer buy 1500€ new Renault tool than invest in IM508 online
AVDI is too expensive & online , better is waiting :sheep:

[Catalizator]

waiting .... the problem is that the new cars are easiest than old cars & OBDSTAR already made Megane 4 cards programming since 18 months !!!!
if Chinese beat it on Renault , VAG , EU cars ; this is the end of EU tools .
In France , demand of 2017+ Cars represent one job / month , it's not an emergency update , buy another tool ( lonsdor autel obdstar ) just for Megane 4 Twingo 3 is not reliable for me because i have better covering with my other tools , i prefer buy 1500€ new Renault tool than invest in IM508 online
AVDI is too expensive & online , better is waiting :sheep:

what new tool for 1500 are you writing about?

[TERMINATOR1000]

what new tool for 1500 are you writing about?

i hope an new "Reno eku told" , for new 2020 cars who need token !
future is to lock OBD2 access by Renault.net , 2 solutions - direct access to BCM OR official token !

[maxim200]

I tried to program the card for Laguna III, the ecu tool connected to the UCH without a problem, but there was a problem as seen below. anyone had like that?

[11:38:08] Status : Waiting For Commands
[11:38:11] Status : Finding USB Device Status: OK
[11:38:12] Status : Connecting UCH by CAN...CONNECTED
[11:38:12] Status : Reading UCH Identification...DONE
[11:38:40] Status : Gaining security access 2...SENDRESP ERROR_35
I tried to program the card for Laguna III, the ecu tool connected to the UCH without a problem, but there was a problem as seen below. anyone had like that?

[RIMKACHIP]

Remove card and ignition off before programming card ?


Envoyé de mon iPhone en utilisant Tapatalk

[castin]

Last time im program add card for Clio IV 2018. Use option "read pin code for car >2015" (must hawe one working card). Clear HFM, learn ISK from working card and then program second card (Hitag AES).

[RIMKACHIP]

No same procedure clio 4 and megane 3.


Envoyé de mon iPhone en utilisant Tapatalk

[godfathertre]

I can Renault ecu tool
Program Mercedes Citan remote 2013 to 2019 for additional and lost keys if anybody done it and with Renault ecu tool thanks I have
A enquires from client and need to check.

[figani]

I can Renault ecu tool
Program Mercedes Citan remote 2013 to 2019 for additional and lost keys if anybody done it and with Renault ecu tool thanks I have
A enquires from client and need to check.


mercedes...?
not possible with renault ecu tool...
its FBS4, and only by dealer or someone with xentry online and with permisson to make keys...

[RIMKACHIP]

mercedes...?
not possible with renault ecu tool...
its FBS4, and only by dealer or someone with xentry online and with permisson to make keys...

No citan is a kangoo2 !! Job ok with Renault ecu tool.

https://uploads.tapatalk-cdn.com/20210118/87fc72fb363b7373491d50d0d6e0f3a6.jpg


Envoyé de mon iPhone en utilisant Tapatalk

[godfathertre]

Can it lost keys also or only additional thank you.

[figani]

No citan is a kangoo2 !! Job ok with Renault ecu tool.

https://uploads.tapatalk-cdn.com/20210118/87fc72fb363b7373491d50d0d6e0f3a6.jpg


Envoyé de mon iPhone en utilisant Tapatalk

Unbelievable....
Perfect....
Good news....

[castin]

I tried to program the card for Laguna III, the ecu tool connected to the UCH without a problem, but there was a problem as seen below. anyone had like that?

[11:38:08] Status : Waiting For Commands
[11:38:11] Status : Finding USB Device Status: OK
[11:38:12] Status : Connecting UCH by CAN...CONNECTED
[11:38:12] Status : Reading UCH Identification...DONE
[11:38:40] Status : Gaining security access 2...SENDRESP ERROR_35
I tried to program the card for Laguna III, the ecu tool connected to the UCH without a problem, but there was a problem as seen below. anyone had like that?
Today hawe the same problem with Laguna III 2009. Im try many times - stil error_35. Im try other software: 2.77, 2.88 - not possible add card.

[godfathertre]

I have not done a laguna for ages ask Terminator he programs quite a few Renault providing card was out and dash off should work have you got battery support when programming
Or failing that there is a bug on software.

[TERMINATOR1000]

Today hawe the same problem with Laguna III 2009. Im try many times - stil error_35. Im try other software: 2.77, 2.88 - not possible add card.

Hello , you have no other tool to test ? Renolink , X100 Pad2 , Lonsdor , AUTEL , free AVDI rr012 , OBDstar , UCO ....
Since 4 years ago the only fail is on 2016 Megane 3 to add card , now suported by AVDI since 1 year & R.E.T since 2020 , one car for ++4000 use !
Quality of R.E.T PCB get down with his price , maybe electronic issue ???

I use AVDI in complement since they abort the project , sad days for this tool , passed by every new tools !!!!

[godfathertre]

I hope the bring the hitag aes programmer for later cars even smok now does lost keys in clio by obd with the new software I hope Renault ecu tool developer take note
How hard can it be.

[voltec]

Today hawe the same problem with Laguna III 2009. Im try many times - stil error_35. Im try other software: 2.77, 2.88 - not possible add card.
I was programming recently and there were no problems with Laguna III.
Car with or without HF? Maybe a working HF card was within range ???

[godfathertre]

I where did you buy the renault ecu tool have you checked cable to box connections to see everything okay
Even renolink can do that need to Get
other tools to finish the job you cannot run business with only one tool you need several this should
Have been a 5 minute job with the tools mentioned on previous answers good luck.

[castin]

I was programming recently and there were no problems with Laguna III.
Car with or without HF? Maybe a working HF card was within range ???

No, car w/o HF, im try start without card in cardreader - "no card" info on dash. Interface is OK, last time im add card to Clio IV 2018 - no problem.

[TERMINATOR1000]

I hope the bring the hitag aes programmer for later cars even smok now does lost keys in clio by obd with the new software I hope Renault ecu tool developer take note
How hard can it be.

personally i take another way , AVDI full Renault + ProTag , fast job all by obd2 , i can't waiting for ! i lose to much with big customers , i prefer give my money to another tool !

[kareszka]

Hi !
Can I spare card programing (blank card , not precoded) with RET for renault captur 2013 .

[sjc1]

yes iv done a few

[Brat]

yes iv done a few

And in clio 4 2016 AES blank card can bee add w/o precode with RET?

[castin]

Guys...problem with add card to Laguna III solved....
Im Idiot of the 01.2021r....
Im try add card by Laguna III menu...
car is Megane III - 1min job, all work
Sorry for my bad
:roflmao::roflmao:

[godfathertre]

If you are using a laptop
With small screen this can
Happen I always go trough the menu and make sure I have the right model selected you got there at the end.

[auto techniek]

Anyone tried this tool for Smart 453 key program from 2017?

[drugowaz]

Not support yet.

[figani]

Anyone tried this tool for Smart 453 key program from 2017?

I´m waiting each day for it...
and checking Homepage...

[drugowaz]

I talked to him few day ago. Its in procces. But solution without bug takes time. Quarantine affects all.

[TERMINATOR1000]

I talked to him few day ago. Its in procces. But solution without bug takes time. Quarantine affects all.

After Lonsdor in 2018 TDB1000 in 2019 Obdstar in 2018 Autel in 2019 .... & Free for AVDI users , it's not to late in 2021 ?



I´m waiting each day for it...
and checking Homepage...

No need to waiting anymore it' s an ABRITES freeware since couple of months !!! R.E.T = R.I.P
I bought it for "free Protag +free Fiat Transponder" promo , 799 € and finally all Renault is included RR012 !!!!!!!!!!!!!!!!!!!!!!! FOR FREE !!!!!!!!!!!!!!!!

[qeso705]

Terminator1000 please stop spam RET topic. Abritus wont cheat even customers for free + additional go online and charge Ams. Uco is online too and charge yearly subscription + will extra money for each option. Ret isnt perfect but have free updates and isnt overpriced.

[TERMINATOR1000]

Terminator1000 please stop spam RET topic. Abritus wont cheat even customers for free + additional go online and charge Ams. Uco is online too and charge yearly subscription + will extra money for each option. Ret isnt perfect but have free updates and isnt overpriced.

what ???? rr012 is free & no need internet , rr012 was made in 2016 .... I just inform dreamers ! NO AMS FOR RR012 NO AMS FOR ProTag ....

If you wan use R.E.T for AKL Clio 4 you need AES programmer , i use AVDI + ProTag ( 799€ ) for this , it's not my fault is Trafic 3 Twingo 3 Smart is FREE , it' not an spam , it's reality NOT SPAM : i use ABRITE to made dealer key

As you know, PINCODE read procedure by diagnostic is restricted for 2015+ Clio
IV / Captur vehicles. It's easy to override PINCODE read restriction when one
valid card is available, but key learning gets more complicated when all cards
were lost: HFM module must to be removed from the car, wires to be soldered
directly to NEC MCU to upload Data Flash content.
This article will describe step-by-step key learning procedure when all cards
were lost without intervention to the HFM module. All you need is a blank card
(of correct type) and transponder programmer, capable to operate with HitagAES keys. Current article refers to Master Key III (MK3) transponder ( me i use ProTag )
programmer, but you are free to use any other programmer with support for
Hitag-AES transponders.
Before to proceed please check if you got latest software of Renault ECU Tool
downloaded (V2.93 or higher).

[rob h]

REPAIR ECM MILEAGE: EDC17, DCM3.4, SID305/306/307/309/310, EMS31XX (OBD-II CAN-BUS)
Reset total distance in ECM.




I have tried this, on 2 different Masters, sid310 ecus.
Failed.

Any off you guys tested this?




AKL hfm, i just read these modules with a prog.
And buying protag, that i would never do.
It must me possible to alter aes key data with Xhorse tools.

[figani]

I have tried this, on 2 different Masters, sid310 ecus.
Failed.


does the function in your case not work...?
or you even get no communication...?

[rob h]

I get comm, but no result.
Tried a few methods, with battery supply.
Turning , and leaving ignition off, various times. etc

[Catalizator]

does anyone know if the project is working or is it the end and this is the latest update?

[solitaire]

Working..
many other projects have one, two updates per year
e.g. tango last update 30.09.2020, before 13.03.2020
maybe project dead too?

[TERMINATOR1000]

does anyone know if the project is working or is it the end and this is the latest update?

i don't know , but when customers call me for an KADJAR ou Twingo 3 , they will not waiting last update for 7 years old cars !!!!!!!!
Maybe R.E.T HW can't support read (or write ? ) D-flash by OBD2 , process duration 5 to 20 minute for add key is risky job ?
Free update is also an reason ! Customers pay me 40€ only for coding the key , why free update ???

[Catalizator]

Working..
many other projects have one, two updates per year
e.g. tango last update 30.09.2020, before 13.03.2020
maybe project dead too?
we are discussing RET, but not other third party programmers and their updates.

[godfathertre]

Updates very slow on last year
Hopefully the developer does read this forum and is hoping working to release the latest vehicles which are missing and also maby new hitag aes programmer .

[TERMINATOR1000]

Updates very slow on last year
Hopefully the developer does read this forum and is hoping working to release the latest vehicles which are missing and also maby new hitag aes programmer .

Hello
No need AES programmer , UCO prove it !
Just need to copy UCO :guns:

[godfathertre]

This is good price
https://lock50.co.uk/tagpro/ will buy soon and works with renault ecu tool well done.

[auto techniek]

Nice to hear

Let us know if does work



This is good price
https://lock50.co.uk/tagpro/ will buy soon and works with renault ecu tool well done.

[godfathertre]

Has anybody spoke to the developer
Of the tool waiting for later twingo and later traffic programming still not released updates have been very slow for the last year and no new vehicles .

[davorOS]

work good for now
tested on duster 2015,2016 with 7961M

also manage to unlock locked 7961M dacia AES remote key still not tested on cards and HFM

from
Nice to hear

Let us know if does work

[TERMINATOR1000]

Has anybody spoke to the developer
Of the tool waiting for later twingo and later traffic programming still not released updates have been very slow for the last year and no new vehicles .

Hello
not an easy job , need to program BCM ! this tool never use this process ( 25 minutes ) ... And if it failed car is KO

[p1et]

Hello
not an easy job , need to program BCM ! this tool never use this process ( 25 minutes ) ... And if it failed car is KO

Smart Pro developers found different solution.

[godfathertre]

So what is this different solution.

[TERMINATOR1000]

Smart Pro developers found different solution.


No , they just use AKL AVDI method , more risky but under 3 minutes , i have this option better is use it ONLY on AKL ! If car is dead customer don't blame you :tap:
This car represent 0.05% of job , better are to forgot it !

[TERMINATOR1000]

So what is this different solution.

Virgin BCM to read PIN code , pre_code virgin key or use old one to learn BCM .... classic process on HFM & BCM T4

[ciprishor]

work good for now
tested on duster 2015,2016 with 7961M

also manage to unlock locked 7961M dacia AES remote key still not tested on cards and HFM

from

What module of Tagpro is unlocking 7961M? I got a lot of them and failed before with another tool.

[davorOS]

I have SW02 and unlock dacia duster key,unlocked by change configuration

but you can unlock them without problem with other tool like VVDI prog or X300 dp

[carlosjcm]

Virgin HFM captur, after I try to program cards, autel im608, 1 of the car and 1 blank, reprogram the HFM with the Renault ecu tool or just in renault?
Can someone explain to me how to proceed with the renault ecu tool to get HFM active? Thanks

[solitaire]

Do all by instruction, software write all steps

[carlosjcm]

Renault Ecu tools?

[solitaire]

Yes, you need isk, and you can learn HFM with renault tool

[castin]

Virgin HFM, without one active card or no ISK? I think not possible with RET. If You hawe one working card, then OK. Virgin HFM, insert WORKING card, then read PIN and learn new card.

[solitaire]

I think im608 somethere saving isk, need try relearn HFM with im608

[carlosjcm]

Virgin HFM!


Possible R E T:


1 car card with data, even if the car given to virgin HFM does not work

[godfathertre]

Anyone tested any of the new updates I tought we where getting some more vehicles but very little on 2.99

[rellullapaasee]

Anyone tested any of the new updates I tought we where getting some more vehicles but very little on 2.99

Clio IV PIN from dump (also ISK+crypto key) is working fine! But where are Megane IV, Scenic IV, Talisman etc? Couldn't some similar method be used with those too? Should be quite foolproof at least.. Support only for Clio IV is quite sad.

[Catalizator]

why does everyone need to program keys ..... besides these functions there are tons of other functions that can be added to this wonderful device. everything takes time, we expect and get :)

[rellullapaasee]

why does everyone need to program keys ..... besides these functions there are tons of other functions that can be added to this wonderful device. everything takes time, we expect and get :)

That is true but key programming gives usually good starting point for replacing damaged control modules. And keys are common place that break even with new cars. At least nice to have backup solution if damaged key repair fails.

But yes, at least for me Laguna II card reset pops up question: Why?

Edit: I think that some Renault generic TPMS feature could be nice. All information should be available and should not take too much effort to add... At least more use than card reset.

[voltec]

That is true but key programming gives usually good starting point for replacing damaged control modules. And keys are common place that break even with new cars. At least nice to have backup solution if damaged key repair fails.

But yes, at least for me Laguna II card reset pops up question: Why?

Edit: I think that some Renault generic TPMS feature could be nice. All information should be available and should not take too much effort to add... At least more use than card reset.
Very useful card reset function.
It is a card with 3 buttons, the so-called Sunshine. A very shortage card. The card is not included in the aftermarket, only the original.

[carlosjcm]

Renault ecu tools, already programming clio iv and captur without problems (either before or after 2015). Without being AKL!

[Brat]

Renault ecu tools, already programming clio iv and captur without problems (either before or after 2015). Without being AKL!

wath is the procedure for add card in clio 4? it is need virgin HFM? it is need precode new card with ISK before add in car?

[RIMKACHIP]

Renault ecu tools, already programming clio iv and captur without problems (either before or after 2015). Without being AKL!

Need to precode card if you are in AKL and after 2015. Before 2015 no need precode but after 2015 must precode card or read dflash of hfm with programmer. If not AKL you can learn after 2015 with enable protection with working card no need to precode card or open HFM.


Envoyé de mon iPhone en utilisant Tapatalk

[carlosjcm]

https://premium-tools24.com/image/catalog/blog/RET/improved_renault_ecu_tool_software_19.02.2019.jpg

[carlosjcm]

1 - Read identification
2-
3-
4-

Help, the next steps, please. Clio iv 2015+

[Ecuprog31]

Read id
if it show you pincode you can add card without problem

[castin]

https://premium-tools24.com/image/catalog/blog/RET/improved_renault_ecu_tool_software_19.02.2019.jpg

If try ADD card, then:
1. Enable Read Pin
- Must reset to virgin HFM (need WORKING card from car ! ! !), learn HFM by inserting WORKING card. Read info when adapt Virgin HFM. After this, PIN code read is enabled. Very safe procedure.

[carlosjcm]

Thanks my friends

[carlosjcm]

Lonsdor - no
Autel - no


Renault ECU menssage

I tried to program a card in megane 3 2011 and this message appears :(


What I do know is that the UCH was switched o Renault 1 year.


Help

815650

[TERMINATOR1000]

hello , you need AVDI for updated cars , my question is why Renault don't do this on all cars !
it's like an CAS3+ ISTAP , this BCM is protected .

[carlosjcm]

:(

Thanks my friend

[carlosjcm]

Good afternoon.

megane 2


I have a used steering lock, I wanted to put virgin and then I program for the car. Renault ecu does anyone know how to do it?
Help
thank you

[RIMKACHIP]

Not possible on obd. Need to open and virgin 24c04.

[Catalizator]

we are here and still waiting for updates :)

[godfathertwo]

I tought we could do later cars still nothing really new for example later traffic and twingo etc when will they come.

[Jimmy07]

Wanting to buy a Renault tool to bring Trafic 3 back to life if worse should happen can ECU or Clio do this ?

[Ecuprog31]

Renault ecu tool don’t support traffic 3

[godfathertwo]

Was looking at uco tool
Seem to support later Renault than any other tool but not busy enough to justify the purchase maibe if business picks up.

[TERMINATOR1000]

Was looking at uco tool
Seem to support later Renault than any other tool but not busy enough to justify the purchase maibe if business picks up.

AVDI is N°1 , support ALL Renault cars !!!
Clio 5 add Key & card
Kangoo 2020 & last Master 3 ( LCD dash ) AKL
Megane 4 2018+
Clio 4 2016+ AKL + Trafic 3 with cards
Twingo 3 AKL
Megane 3 2016+ encrypted BCM
...other cars before 2014 is free since last years , but tool is over £5000 :coat:

[godfathertwo]

So why pay 5000 surely that uco takes less than one minute to code cards the only disadvantage is online only but the licence not that expensive I see they are reduced now certainly if I was busy enough I would consider this since arbrites too expensive and Renault ecu tool too slow for any serious updates I do not know how business but
since the beginning of covid over one year the key business has dried up on my area too many people doing keys for peanuts and is destroying our business your tube video giving free advice and also taking information from forum
Some members only visit when they need help.

[TERMINATOR1000]

UCO , don't support :

Trafic 3 / Twingo 3 AKL
Megane 3 2016+ encrypted BCM
Kangoo 2020 & last Master 3 ( LCD dash ) AKL

ONLY AVDI
AVDI is the first in key now !!!!


On new 2020+ Renault cars CAN GATEWAY lock OBD2 key programming

R.E.T is the last , under chinese TAB PAD ....

[Mmotul]

Hello

I want to buy Renault Ecu Tool. But i need to know if it possible to virgin used ESCL on Renault Clio IV 2018?

[godfathertwo]

Better ask member Terminator he has plenty knowledge on Renault Programming and Coding.

[drugowaz]

It not virgines. It only learns. Clio 4in protected mode. Download soft and u see what u can do.
If need tool i can get you.

[godfathertwo]

This is for drugowaz do you know if there are any new vehicles on updates as is nearly four months since last updates we where promised traffic 3 plus later twingo but nowhere to see this updates thank you.

[drugowaz]

Still no :(

[carlosjcm]

If try ADD card, then:
1. Enable Read Pin
- Must reset to virgin HFM (need WORKING card from car ! ! !), learn HFM by inserting WORKING card. Read info when adapt Virgin HFM. After this, PIN code read is enabled. Very safe procedure.

Clio iv +2015
Captur +2015


Ie I only see the pincode at the end of this procedure all right?

For me to add a card, the procedure will be like this.

1 - Enable read pin (2015+)
2 - Reset HFM to Virgin
3 - Learn HFM (need WORKING card from car)
4 - Read information
5 - KeyCard programming

[Catalizator]

will there be information about further updates or is it already out of date?

[RIMKACHIP]

will there be information about further updates or is it already out of date?

You can have 3 updates in same month or nothing on 4 years. Just wait. I have this device since 2013


Envoyé de mon iPhone en utilisant Tapatalk

[TERMINATOR1000]

!!!!!!!!!!!!!!!! NO NEED TO WORRY IF CAR "HUNG UP" !!!!!!!!!!!!!!!!!!!

hello , after +300 cars , R.E.T kill my first 2016+ Clio 4 .
Only one solution , LEARN HFM with old card with CAN-CLIP + Renault.net .... under 10 minutes .
it's a big problem if AKL , if dealer is closed , you need to be worry !

RENAULT.NET and an friend technician save day .849569

[godfathertwo]

I tought you had
Avdi Renault for these Vehicles.

[TERMINATOR1000]

I tought you had
Avdi Renault for these Vehicles.

Hello
Yes for AKL ! For add key R.E.T is enough ....
AVDI use 2 methods :
- Read PIN code by OBD2 in HFM flash for add key ( 100% safe ) 15 minutes
- Virginize HFM like R.E.T for AKL & ADD key ( 100% fast ) 2 minutes

Maybe some cars are updated by dealer ? Only future can answering !

[RIMKACHIP]

Best solution and safe after 2015 dismantle HFM read dflash on table.

[castin]

Im check every day for update - 6 months w/o update!
It has never been like this before.

[RIMKACHIP]

Im check every day for update - 6 months w/o update!
It has never been like this before.

[emoji23][emoji23][emoji23] Every day since 10 years !! Last long time for new update was update for clio IV in 2018.


Envoyé de mon iPhone en utilisant Tapatalk

[castin]

Maybe they'll add a Clio V? :roflmao::roflmao:

[TERMINATOR1000]

- Clio V , Arkana , ZOE .... It's cheapest ABRITES special function , i think R.E.T can really add latest models if we paid for job !
- Trafic 3 & Twingo 3 it's no safe job in AKL situation , long job for ADD key ! =nope
- Kangoo & Master 2018+ easy job but need an tag-key-tool for ADD KEY
- Megane 4 ???

[RIMKACHIP]

Maybe they'll add a Clio V? :roflmao::roflmao:

In 2028 [emoji23][emoji23][emoji23]


Envoyé de mon iPhone en utilisant Tapatalk

[turismou]

- Clio V , Arkana , ZOE .... It's cheapest ABRITES special function , i think R.E.T can really add latest models if we paid for job !
- Trafic 3 & Twingo 3 it's no safe job in AKL situation , long job for ADD key ! =nope
- Kangoo & Master 2018+ easy job but need an tag-key-tool for ADD KEY
- Megane 4 ???
They should really work on such a TAG adapter/programmer. I don't think it would be too difficult to create an addapter that plugs in just for generation of dealer key and then continue to programming to car. It would enable all new vehicles. I write this still hoping that the developer reads DK from time to time.

[godfathertwo]

Is 6 months now still no updates
No new stuff
For a long time
I hope we will see
Something worth waiting for this
New updates when
They will come.

[newone]

maybe the problem is the free updates,if so then he can go like old truecode and charge a fair price for new updates,it is a good kit with a good developer behind and will be pitty to be left...

[solitaire]

Now developer work on other project.

[Catalizator]

Now developer work on other project.

that is, this project is buried?

[TERMINATOR1000]

that is, this project is buried?

yes , since Clio 4 update , 2 years ago before COVID 19 :thefinger:
AVDI give 2014 cars & before for free ( including Trafic 3 + Twingo 3 ) , i paid "ARKANA .... Clio V" special function for 280€ ( less than one card price !!!!! )
New RET tool will be stolen by chinese under 2 week

[godfathertwo]

I hope not since this tool had a lot of potential I hope developer will bring a upgrade for the tool otherwise will be a shame as the Chinese keep releasing tools that are not tested at all.

[solitaire]

that is, this project is buried?
No.
Not yet :)

[hollanda]

I don’t think that the chinees will copy this device,
because the original it’s not very expensive!
I’ve also avdi but for the Renault i use RET. Some cars not works with
avdi. Or don’t read the good pin. Maybe 2016+ better to use avdi.
also to reset or to make virgin for some ecu’s RET is better.

about the support. I’m happy with the direct contact with the maker. He always helps me when i ask something.
help me also with diagrams and good tips. I read a lot off bad news about support on the forum,
but avdi also have bad support or dont helps really always or you needs to pay sps.
For clio4 2016+ if you read by programmer then its the safest way.

[TERMINATOR1000]

I don’t think that the chinees will copy this device,
because the original it’s not very expensive!
I’ve also avdi but for the Renault i use RET. Some cars not works with
avdi. Or don’t read the good pin. Maybe 2016+ better to use avdi.
also to reset or to make virgin for some ecu’s RET is better.

about the support. I’m happy with the direct contact with the maker. He always helps me when i ask something.
help me also with diagrams and good tips. I read a lot off bad news about support on the forum,
but avdi also have bad support or dont helps really always or you needs to pay sps.
For clio4 2016+ if you read by programmer then its the safest way.

R.E.T better than AVDI !
AVDI already Made 2021 cars , new Duster , Clio V , Arkana ... maybe you talk about FVDI2014

[RIMKACHIP]

Ret better than avdi ??? [emoji23][emoji23][emoji23]
Lada better than Lamborghini. Can not compare with avdi is not same category.


Envoyé de mon iPhone en utilisant Tapatalk

[tankist83]

856362
What should I do with this, I'm afraid to reset the bcm.

[red69]

Hello tankist83,
dont use RET for this

[Ecuprog31]

You couldn’t virgin this bcm
it’s locked bcm
only avdi can add card

[solitaire]

as I've said: http://www.immo-tools.lt/en/products/asw-next.htm

[godfathertwo]

Maybe we can get some new vehicles for Renault ecu tool since now 6 months and no updates that looks like only motorcycle scooter stuff.

[Catalizator]

as I've said: http://www.immo-tools.lt/en/products/asw-next.htm

probably now RET update will continue :)

[Catalizator]

Maybe we can get some new vehicles for Renault ecu tool since now 6 months and no updates that looks like only motorcycle scooter stuff.


£ 1000 for new cars. there is no hope that we will get it for free. possibly other functions in the update but not key programmers
https://lock50.co.uk/lock50-obd-oem-diagnostics-and-programming-tool/lock-50-obd-key-learning-licences/key-learning-the-l50-102-license/

[drugowaz]

I would not mind pay 500-1k if i get all those new and working.

[hollanda]

as I've said: http://www.immo-tools.lt/en/products/asw-next.htm


I’ve get my ASW NEXT.
works very fine. Some ecu’s are difficult to read but whiteout this tool!
Very fast!

[castin]

Guys, 04.2021 last update. This tool project death or what? IO Terminal the same :/.

[dijo]

He is working on ASW Next Scooter tool now...

[Sasika]

A big update....:bawling:

926209

[TERMINATOR1000]

A big update....:bawling:

926209

no upgrade !!!
just correct own bug on Clio 4 2015+ ....
Clio 5 , Dacia 2018+ , Renault Express , Arkana ... are very easy cars to add key & card !!!! That's BIG UPDATE

[godfathertwo]

Easier menu to navigate keys airbag etc etc .

[fred77]

This function is not for us ! Developer just show to other developer ( AVDI Lonsdor AUTEL OBDSTAR ) that he can program used BCM , 2016+keys ..... but for 500€ he wan't ( https://www.emulatorshop.com/devices-En/renault-ecu-decoding-tool-en )
For use it you need 1°)PIN code + 2°)AES TAG-KEY programmer
1°) need to flash BCM ( maybe an risky job for RET ? they delete Trafic 3 key learning to 2.93 update )
2°) 1500€
for conclude , i'm ready to pay for an new tool , but if nothing move i will bought Lonsdor AUTEL just for new 2016+ Renault

wouldnt use autel tho did a 2019 dacia no probs but think your money better spent on smartpro or avdi. safer

[godfathertwo]

Londsor or autel both suck on Renault let us know next time your brick your Renault with these tools nothing has been really tested on later Renault if you want a safe tool avdi Renault ecu tool still very good tool with Renault i have been using for years and provably one of the best purchase ever made .

[figani]

Update is released...
New styling colour...
:dread:

[reyll03]

what was the bug on Clio?

[TERMINATOR1000]

what was the bug on Clio?

before update tool bug 1 time/1000 cars, today no bug with RET , but RENOLINK & AUTEL kill HFM in AKL situation on Clio 4 2016+

[reyll03]

Did you refer on clio after 2016 add key or before, or in AKL ? 1 TIME/1000 in what situation?
In the release note there isn't this particular case that it corrects bug on clio.

[TERMINATOR1000]

Did you refer on clio after 2016 add key or before, or in AKL ? 1 TIME/1000 in what situation?
In the release note there isn't this particular case that it corrects bug on clio.

With last update i kill 100% of HFM 2015+:nob: one car one fail !!!!!!!!!!!

DO NO USE THIS TOOL IF YOU SUFFER OF HEART PROBLEM


​Resolved manually with old version of SW . Developer is not motivated , better is to erase this last update .

[godfathertwo]

So is the update fixed or not or best to invest in avdi.

[TERMINATOR1000]

AVDI 888€ + Protag 500€ with Renault functions is only for Megane 4 1600€ , Arkana + ZOE + Clio V = 400€ , Twingo 3 AKL 800€ , Kangoo 2018+ 400€
Renault Ecu Tool was the beter 5 years ago for 800€
RET is the most profitable tool after FNR4 in 1 24€ in key tool programer history

Just don't use latest update for Clio 4 2015+

[godfathertwo]

What version of renault ecu tool software are you using on 2015 plus and safe thank you.

[TERMINATOR1000]

What version of renault ecu tool software are you using on 2015 plus and safe thank you.

Since today i use AVDI & customer pay 20€ more than R.E.T , i can't lose time & money with hazardous tools !

[reyll03]

Tomorrow I'll have to program/add a new key in a clio IV 2016, so I'll try with no RET's new release version, but with the 3.01

[godfathertwo]

Let us know how you go on with old version of software i tought developer of renault ecu fixed this with latest update but according
To member terminator is worse will need to invest on avdi eventually .

[TERMINATOR1000]

Let us know how you go on with old version of software i tought developer of renault ecu fixed this with latest update but according
To member terminator is worse will need to invest on avdi eventually .

I just advertise members before they fall in the trap !
If they have time to loose with RET , hey we go ...

[reyll03]

Today I added a new key in a clio IV 2016, but I used zedfull and not RET; I worked with a voltage stabilizer at 13,8 V during operation; 5 minutes; all ok; But I'd like to do this operation with RET, because with zedfull for this operation I use credits. I wait positive feedback with new release or fix.

[godfathertwo]

Why did you not use old software 3.01 with RET would have worked as Terminator said As Developer did not test last update i hope this is fixed soon as otherwise will mess up a lot of hfm i have zedfull myself so would use that till fixed RET or use old version 3.01

[reyll03]

Because with ZED I did 3/4 clio/capture(model after 2015) in the past and were all ok; then when I have heard here that there was problem with RET after 2015/16, I wasn't sure with RET, even if the risk is present also with zedfull by obd, but my experience was ok with zed so I decided to do with this. First I tried to "read identification" with RET to see if the pin was visible, then when I saw it was crypted, I did the operation with zed.
In my opinion many people do this operation without voltage stabilizer, so the risk is higher. Also in mykeyspro silca/infoquest there is the advice that battery support is always required(silca says "required" and not "reccomanded")
In case that you block the vehicle what is the solution? Unmont card reader and read the data by dump?

[godfathertwo]

I use battery support all the time on all key programming.

[CarDiagAMG]

I have R.E.T and I need add to Master IV 2020year. I can do?

[Ecuprog31]

I have R.E.T and I need add to Master IV 2020year. I can do?
No it can’t

[godfathertwo]

I do not know if avdi cover this model any avdi users will let you know for sure .

[CarDiagAMG]

No it can’t
What tool I need?
I have now renolink and R.E.T.

Thank's

[godfathertwo]

I think zedfull can do it i do not know if avdi does it do not use ret or renolink otherwise will be a expensive mistake to make for you .

[reyll03]

I have a question: what are the programmers that do backup for renault?
Zedfull? tdb100? RET? Abrites?

[TERMINATOR1000]

What tool I need?
I have now renolink and R.E.T.

Thank's
AVDI for AKL .
for ADD Key ZEDFULL read ISK to valid key & calculate PIN code ...
Cheap tool can not do this job for the moment

[sdnatlst]

whats the fix when the error on clio 2016+ comes up terminator, how to resolve

[TERMINATOR1000]

whats the fix when the error on clio 2016+ comes up terminator, how to resolve

If R.E.T cause this error , he can RESOLVE the BUG , just use different version to read PIN code in HFM Dflash ...
& if is an RENOLINK error , HFM IS DEAD , use Renault.net to learn VIRGIN HFM with an valid key card ...

( if you pay for AVDI Renault key , use it )

[Mmotul]

Hello
Is possible with RET made virgin HFM Clio 4 2018 ?
Friend have car withou HFM, but he have original cards. If possible make virgin donor HFM and then pairing online with CanClip.
I tested some time ago, but I think virgin function is not ful virgin, pin and isk still inside?

[reyll03]

there is a new little upgrade 4.01, I don' t know if it is enhances clio

[godfathertwo]

Is anybody tried new 4.01 version on clio 4 as terminator said last version was damaging car.

[TERMINATOR1000]

V4.00 One car 2016+ one crash !

[godfathertwo]

What about new version 4.01 released in 2023 .

[godfathertwo]

I have a traffic to do spare key i have zedfull is it safe to do or is it better to buy avdi licence i saw a french video adding a key to traffic 2017 and also twingo 3 any feedback.

[godfathertwo]

Can anybody share version 3.01 and others as i had to wipe my hard drive and lost
Old software folder with older versions.

[dijo]

Version 2.77

[godfathertwo]

How do you fix crash
With Renault ecu tool when programming clio 4 2014 plus with working key is it best to back up flash first .

[p1et]

I have a traffic to do spare key i have zedfull is it safe to do or is it better to buy avdi licence i saw a french video adding a key to traffic 2017 and also twingo 3 any feedback.

ZED might be risky to use. AVDI is the only safe tool to program them at the moment.

[godfathertwo]

Might leave now as never used
Zedfull on these vehicle before
And whats up if goes wrong is anyway to restore with zedfull how to fix it as licence for avdi traffic 3 and other licence not cheap .

[p1et]

Again, AVDI is the only tool which can fix if other mess up, which I think is separate license from key programming to this model :D otherwise BCM reprogramming by dealership. Correct me if Im wrong.

[godfathertwo]

Spoke to uk hickley zedfull support and said can do up to 2019 traffic only add key with zedfull i hope i do not regret taking this job on i will have a good battery support unit whilst programming extra key.

[p1et]

Yes of course it can but if you have bad luck, then you will end up with no runner. Minimize the risk by puting stable voltage power and try. Even Smart Pro warns you that there is a risk, because they are unable to guarantee 100% success rate because of independent things from then, concerning BCM

[godfathertwo]

Need to wait for abrites offer again just missed december
Added key with zedfull with god battery suppport that was a scary moment as during
Programming gave me a error on new key which zedfull precoded luckly a had one more key that i used and reprogrammed working key plus added one remote key and precoded it will not attemt again till i purchase the avdi full Renault package on next offer and will
Charge plenty on this as this was a free job for my mechanic in future .

[castin]

Can anybody share version 3.01 and others as i had to wipe my hard drive and lost
Old software folder with older versions.

Version V3.01

[reyll03]

Another little update version v4.02, but from the notes, nothing important for key program

[baddaren]

Hello Godfathertwo
Why buy AVDI? You programed Traffic3 with ZED FULL and it worked. You had good
Power supply on and it will keep working. I have Smart pro and zed full, to be honest
I do these with smart pro. Never had any problem, always have 100Amp stabilizer on.
I am a small locksmith, specialized in car keys. Making 3-5 car key/day. I have been
Trying to avoid AVDI, very expensive and have to pay every year. If not making a lot of
Renault 2015+ and if not trusting zed full. Maybe buy Smart pro? I have been investigating
, checking. I think ZED FULL works and it is safe for Renault traffic 3 2015+.After reading
Countless hours in forum and facebook. Also it is standard software in the ZED FULL.

The only thing maybe AVDI can do should be Renault Master 2020-21, but I think ZED FULL
Can do these ones to. I bought ZED FULL for Renault and FIAT instead of buying AVDI. It
Seames AVDI people and users is trying to scare everyone to sell its product. I hope I made the right decision buying ZED FULL and I am open for comments.

Regards J

[godfathertwo]

The difference avdi can fix it if it goes wrong plus Zedfull does only do additional keys on traffic plus or twingo latest model avdi does also lost key at the moment is the safest on these vehicles not cheap but the best on Renault you do need the Full Renault Package as there are several licence you need to have and smart pro is £4000 pounds to buy and not busy at the moment
When business pick up avdi Renault full package will be my my next purchase.

[reyll03]

Anyone know how amp takes to program a Renault with stabilzer voltage? the vehicle in programation status is off and you turn on, but non start the vehicle in add key status, there isn't any that takes current, how many amp?

[baddaren]

Hello again godfathertwo, I have ZED FULL plus. From what I can see in simulation mode I can make AKL Renault traffic +2015. With Smart pro I can make Traffic 3 and twingo up to 2019 AKL. Smart pro can not make traffic 2019-2021. But you are right, AVDI is the best tool for Renault key programming. My problem is that I do not make enough Renault to pay for AVDI. It feels like commitment for life. My main tools is TDB1000 for PSA, volvo and hyundai/kia. especially PSA is super. Also Xhorse for VW , MB and BMW. Good luck my friend. Regards J

[reyll03]

another relaase but for a model that I have never seen (Renault Avantime D66)

[Antonio266]

another relaase but for a model that I have never seen (Renault Avantime D66)
It's an old model produced between 2001 and 2003, only a few have been produced.
Honestly I've never seen one in my life, it's a pretty pointless Upgrade release.

[castin]

OMG, next update V4.04 - Renault Clio I - KEY CUT CODE BY DOOR LOCK PIN'S.

[godfathertwo]

Is a shame very good tool needs a serious upgrade i have bought now avdi and protag
And will get the all Renault package soon i am afraid if the developer could include some later models of vehicles would be great .

[tankist83]

New update!!!

Renault ECU Tool V4.04 (https://www.immo-tools.lt/site/files/failai/Renault_ECU_Tool.rar) (16/3/2023)

Autoliv EC5 Airbag for Espace III. R/W MC68HC11 EEPROM, reset CRASH.

[Matronix]

Had some request on the Avantime but even though now we have programming options, cannot find the keys so still useless ;)

[castin]

New update!!!

Renault ECU Tool V4.04 (https://www.immo-tools.lt/site/files/failai/Renault_ECU_Tool.rar) (16/3/2023)

Autoliv EC5 Airbag for Espace III. R/W MC68HC11 EEPROM, reset CRASH.


Now live is better. OMG

[RET 2023]

Is the new version really that bad? I just bought RET and I get scared when I see these posts like this, I have one with HW of 2023 but I think I put an older version on it. V3.01 is it stable on Renault Clio 4 After 2016? Of course I want to avoid using HFM Virgin, I thought this was a top tool for this kind of job, hopefully there are people who will keep updating

[godfathertwo]

I am afraid the updates have been really slow nothing worth waiting now the only tool For Renault is avdi the used to have another uco tools but i am afraid the developers plus another 30 people jailed now that used to be very quick online only but they sold them to no trade and very used for stealing cars in France now they only Serious tool is Avdi with the Renault Package Renault ecu tool very old no serious upgrades so need to spend Serious Money with Avdi Original with protag

[Catalizator]

It looks like not everything has stopped. updates are present. can a developer write what new features he will add in the next update? how does asv next

[godfathertwo]

What new features most of these are covered by cheap Renolink no later Traffic twingo etc etc this has been for 2 years i have Owned this tool for years but Defenatly nothing
Of new Vehicles for year i wish the Developer would join with Renolink Developer and Bring a serious new tool toghether or Upgrade with the latest models than this tool could become something else .

[rob h]

Most developers start charging money, for updates, new aplications, etc.
Or they create a completly new tool.


In this case, there may not have been any big updates.
But were not being charged either.

I do have Renolink. But always prefer using this Renaulttool.
Every feature in this tool works.

Many devolopers bring so called beta versions, lots of claims. But nothing realy works safe.


And every time, i want to use my Renolink, my virus scanner gets triggered and criples the use of it.

Who is willing to pay, buy Avdi. Free update for life, that was a big lie.
And the so called AMS, is getting more and more every year.


I would pay, for new Renault Tool added features.
Like a diagnostic menu, similar to Renolink.
A 1 button push, that backup all components configuration.
Or key programming for 2014+ aes remote keys.
Some emulator can gather data from ecus, to figure out isk.
Pay per calculation.

But for know, if i loose this Renault tool, i order a new one the same day.

[galisdoo]

Where to find older version RET.
Best regards

[arosta]

Where to find older version RET.
Best regards
Here you have my Friend..

[tankist83]

I see new version with hardware 2023...
https://mbkeyprog.com/products/renault-can-k-line-ecu-tool

[RIMKACHIP]

I see new version with hardware 2023...
https://mbkeyprog.com/products/renault-can-k-line-ecu-tool

Same hardware just covering different last version is 4.05. Since 29/05/2023.


Envoyé de mon iPhone en utilisant Tapatalk

[godfathertwo]

I see they are selling renaultman ecu tool on aliexpress is this tool being cloned i just hope we will get more updates from developer or is it the end .

[turismou]

I see they are selling renaultman ecu tool on aliexpress is this tool being cloned i just hope we will get more updates from developer or is it the end .
Some versions of IO terminal have been cloned recently and RET is using almost the same hardware... I am honestly very sad for the developer. I hope that he releases some new tool with protection. New updates for RET are basicly not useful and there is nothing for newer cars because there is no TAG for preparing 4A keys.
My RET never failed me and I love it :)

[jodge]

New update
https://www.immo-tools.lt/site/files/failai/Renault_ECU_Tool.rar





Trafic III X82 (2014+) with keycard. Learn CARD / HFM / ECM / ESCL

[Catalizator]

hi. no one knows what kind of renaultman ecu device this is. no reviews means no sales. I hope the copying of good equipment stops!

[fred77]

Most developers start charging money, for updates, new aplications, etc.
Or they create a completly new tool.


In this case, there may not have been any big updates.
But were not being charged either.

I do have Renolink. But always prefer using this Renaulttool.
Every feature in this tool works.

Many devolopers bring so called beta versions, lots of claims. But nothing realy works safe.


And every time, i want to use my Renolink, my virus scanner gets triggered and criples the use of it.

Who is willing to pay, buy Avdi. Free update for life, that was a big lie.
And the so called AMS, is getting more and more every year.


I would pay, for new Renault Tool added features.
Like a diagnostic menu, similar to Renolink.
A 1 button push, that backup all components configuration.
Or key programming for 2014+ aes remote keys.
Some emulator can gather data from ecus, to figure out isk.
Pay per calculation.

But for know, if i loose this Renault tool, i order a new one the same day.


Well EU is getting more expensive to live in every year -so AMS and wages go up.
Part of improving eastern block nations

important question to ask is how much does a f**ip cost vs a decent tool

how many members here walk away if customer's car bricked ???
bet alot

[vialli]

[QUOTE=fred77;4692209]Well EU is getting more expensive to live in every year -so AMS and wages go up.
Part of improving eastern block nations



Really !!!???
This case has nothing to do with you, according to your reasoning, because you are from the UK and have not been part of the EU for more than 3 years.
​

[rob h]

1011390What is the difference between dealer and factory reset? Erase crash.

[p1et]

Recent update from this month, state that it's possible to program cards for Trafic 3 / Vivaro. Anyone tested already?

[RET 2023]

Can anyone tell me if it is safe to press the enable read pin button? after 2016, I had a bug once that the code was deleted from the HFM, then no code was readable, read PIN code failed!, I now have version v4.06, what is the procedure if something goes wrong? Can I try another version, 4.05 or possibly Renolink v1.87 to get the job done or not, it seems a bit like Russian roulette with the button, although I always use a voltage stabilizer.

[RIMKACHIP]

Can anyone tell me if it is safe to press the enable read pin button? after 2016, I had a bug once that the code was deleted from the HFM, then no code was readable, read PIN code failed!, I now have version v4.06, what is the procedure if something goes wrong? Can I try another version, 4.05 or possibly Renolink v1.87 to get the job done or not, it seems a bit like Russian roulette with the button, although I always use a voltage stabilizer.

Use version ret 2.98 for Clio4 captur enable read pin. After 4.0 big risk to erase hfm. Don’t use renolink risk x 10 to fail.


Envoyé de mon iPhone en utilisant Tapatalk

[rob h]

Orange5 China, vvdiprog, upa oem,
They can all read the hfm.

The hfm comes out easily.
Dont risk loosing the data,

The vvdiprog, hfm, in menu failed,
But select mcu in menu, and set MHz to 8.
Is works good.

A touchholder, has not yet been created.
I considered making my own.

For now, i always have a cheap soldeerstation with me.

[RIMKACHIP]

Orange5 China, vvdiprog, upa oem,
They can all read the hfm.

The hfm comes out easily.
Dont risk loosing the data,

The vvdiprog, hfm, in menu failed,
But select mcu in menu, and set MHz to 8.
Is works good.

A touchholder, has not yet been created.
I considered making my own.

For now, i always have a cheap soldeerstation with me.

Ok for AKL but if you want to programming a second card and you have original card ?? Open HFM for this ? Ret 2.98 never fail HFM . Only with > 4.0 fails on enable protection. Believe me I have done a lot of Clio 4 since first day of ret can do.


Envoyé de mon iPhone en utilisant Tapatalk

[RIMKACHIP]

Can anyone tell me if it is safe to press the enable read pin button? after 2016, I had a bug once that the code was deleted from the HFM, then no code was readable, read PIN code failed!, I now have version v4.06, what is the procedure if something goes wrong? Can I try another version, 4.05 or possibly Renolink v1.87 to get the job done or not, it seems a bit like Russian roulette with the button, although I always use a voltage stabilizer.

Caution !!! This operation need to have a working card !! If you don’t have card don’t do this!!


Envoyé de mon iPhone en utilisant Tapatalk

[rob h]

Even with a card, that comes with the car.
Even then, i pull the hfm.

Restoring will cost me to much time.
It might be possible. But i dont mind pulling it.
And those files, might be usefull if i ever need to repair a certain version.

[RET 2023]

I don't think I can put 2.98 on my PC, I have hardware from 2023, I think it only works from version 4.05, but what else can we do without having to solder? So it's really software bound, enable read pin 2015+ that's why I bought the tool, but it shouldn't be unreliable

[rob h]

Next best thing, is avdi.
They sell a package.
If you dont have any other Renault tools, and have enough jobs, buy that.

A orange5 cost about 125.
Soldeerstation, with adjustable heat, 50.

There is a silicone like film,
It comes of easily, i add flux on the soldier spots, then with the hot solder tip, i rubb the film.
The flux will keep the loosend film away.
After thinning all, conect the wires, set freq, read. ( you could backup, full, and clone if needed)
You dont have to write back to add keys.
(you could make a note, and screenshot, when you hook up RET, and make a collection of dumps).

It is the safest way.




Abrites, they will keep raising prices, yearly AMS. No support. Less the 0.
You need the correct hardware package, to start.
If ever you need to upgrade to another keyprogrammer, or programmer.
Then you pay, more, and more.

[RET 2023]

Thanks Rob for your extensive information, it looks like the safest way is the way you have to solder, I will see if there is anything available here in Poland, I will see, AVDI is expensive compared to to Orange 5, while they can do the same thing and that is reading the HFM, perhaps I can still buy the clone of Orange 5? the only problem I have is the time it takes and possible damage to the HFM if it goes wrong, not all HFM are the same version so that must also be taken into account with regard to connecting.

[RET 2023]

i have installed now version 2.89, hopefully i can do this with less bugs enable read pin HFM virgin.

[rob h]

Dont use the old version.
It does not warn you, when there is a protected flash.

All have the same pinout, and on the mcu, you can read, what type it is.
Reading by prog is safe.

[RET 2023]

Okay I will listen to you and do the safe way, I see Orange5 in different versions, is the Orange5 V1.34 clone basic sufficient? this one is 70 euros, it only includes the box including USB cable and then those 8 wires that need to be soldered, nothing extra, see that there are different ones including all those adapters, I would like to choose the right one.

[RET 2023]

I also see that they only support Windows 7 and 8 or does it also work on Windows 10

[rob h]

Programmer, and Renault tool, both work well on Windows 10

[RET 2023]

Programmer, and Renault tool, both work well on Windows 10

Okay, I'm going to order, I see different types with and without license clones, can I order the random v1.34 basic? or should it be a special version of Orange 5?

[rob h]

Yes, orange5 V1.34 is the first released clone version, and works for me. Dont need the version with usb, and script. 136 138, dont know if these are stable.
Basic is fine, you dont need the adapters.

https://www.youtube.com/watch?v=K6Aii9npAQY

Or you could buy a vvdiprog. 400.
Or a oem upa 325.

[RET 2023]

Yes, orange5 V1.34 is the first released clone version, and works for me. Dont need the version with usb, and script. 136 138, dont know if these are stable.
Basic is fine, you dont need the adapters.

https://www.youtube.com/watch?v=K6Aii9npAQY

Or you could buy a vvdiprog. 400.
Or a oem upa 325.

Thanks, I just ordered it and am going to make it my own, I will order flux and solder tin, read that they also use paste, maybe that is easier. I have noticed that it is not only from 2016 that they have an additional secured flash, sometimes also from November 2015, but if I press the button (enable read pin) and it goes wrong, Orange5 cannot still enter this code. read out? then it is really deleted from the HFM.

[RET 2023]

Renault ECU tool

[Catalizator]

Hello. I see that an update has occurred. all is not lost, the project is working

[reyll03]

Hello. I see that an update has occurred. all is not lost, the project is working


I saw that there is version 4.09
but I think that for cars after 2015 like clio4, traffic maybe other programmers are better.
Traffic III with remote key 2015+ is possible or not?

[auto techniek]

Hi


I m trying to do immo off Renault Twingo Safir 2.
Do i need to cut immo line before or after clean immo code?

[jodge]

Hi


I m trying to do immo off Renault Twingo Safir 2.
Do i need to cut immo line before or after clean immo code?

before is the optimal, if you forget then you can cut after too and clear the immo again. The kline and the immo line isn't the same. After cutting you still able to communicate with the ecu

[auto techniek]

So i need to cut only immo line 30 from connector with 35 pins

[jodge]

yepp, as far as i remember it's a slim white wire

[RET 2023]

Can someone help me, I have connected an extension cable to RET, now I have had 2 additional problems, after I tried to learn a key card, is it possible that an OBD splitter is causing this problem?

The vehicle gave the following messages:


Start Stop
Hill Assist
Cruise control


do not work.

[RET 2023]

Even with AVDI you pull the HFM?

or read pin with AVDI.

or read on bench

[Arkadiusz173]

OK, zamierzam złożyć zamówienie. Widzę różne typy z klonami licencji i bez nich. Czy mogę zamówić losową wersję podstawową v1.34? Czy powinna to być specjalna wersja Orange 5?
Can you write how Orange5 works for reading, e.g. Clio and the link where you bought it? I'm looking through offers from China and I don't see that it says reading d70f3633.

[rob h]

Upa oem, vvdiprog, and Chinese Orange5 v134)


When using orange5:
renesas v850 uart
osc 8.000
gnd vcc pdx reset txd rxd
(swapp txd rxd when using orange5)


Pinout is inbedded in vvdiprog sw, and smok multiprog.
Just download these, and look at help files.

[Arkadiusz173]

1066281 This is correct for Orange5?

[carsdoc]

HII IS ANYONE HAVE RENAULT ECU TOOL V4.04 MY DVD IS BROKEN IS ANUONE HAVE IT WILL GREAT HELP 1083768

[wuza]

HII IS ANYONE HAVE RENAULT ECU TOOL V4.04 MY DVD IS BROKEN IS ANUONE HAVE IT WILL GREAT HELP 1083768
Do you mean ori or clone?

[danielif]

Last softvare version, download in oficial site....