Evoque 2012 can problem and Gateway module location

[cyril]

hello
pls i have a Land Rover 2012 Evoque the car have CAN problem remote can work any time but when trying to turn ignition on the dash is black and car would not show key not detected and if you try to scan the car while scanning u can open ignition and start the car normally and if i remove the obd the car stay start but all the dash light go on and rpm go to 0 till scanning again
(i try Kvm Bcm and Cluster and steering lock on another car it work normally so the kit is ok )
any idea where is located the CGW Gateway module?
thanks

[Meat-Head]

OFF TOPIC:-

had an old fashioned transit do the same, had lost an earth, when obd plugged in
joined pin 4 to 5 on obd

ON TOPIC:-

check groubd points

[cyril]

will try to check tomorrow but even obd i have to try many time to can enter after many tries it can connect and them ignition open and can work but will try to check tomorrow
thanks

[cyril]

hello just check all ground point and check on pin 4 and 5 on obd socket there is ground any other idea pls ?