UPC Nagra3 Card Working in Dreambox but need Help

[despdan]

Hi All

Am helping another member here & have his upc n3 card working in the dreambox using rqcs:

Opening sci... Done
Detecting card... Card present
root@dm500 ~ # Resetting card... Done
Identifying card type...
Historical bytes: D N A S P 1 4 2 R e v G 0 2
44 4E 41 53 50 31 34 32 20 52 65 76 47 30 32
Card type: Nagra
ROM Revision: 142
EEPROM Revision: RevG02
Configuring sci...
SCI | f: 3574595 | T: 1 | ETU: 32 | EGT: 1 | CWT: 25 | BWT: 89291 | WWT: 0
Slot custom parameters:
des_key: 0102030405060708091011121314
box_key: ################
dt06_key_0d:
cam_n: ######################## ...
Long parameter, first 32 characters shown, 128 total.
secondary_key:
rsa_key:
Card start-up initialization...
Using Plain CAM N session negotiation method:
Setting Field Size: Done
Retrieving IRD serial number: ########
Retrieving CAM serial number: ########
Retrieving System IDs: 5F01,5F02
Retrieving CAM challenge data: Done
Performing Session Key Negotiation: Successful
Starting card worker thread... Done
Starting protocol server on port 10000 [newcamd protocol]
Logical Slot 'Lower' READY!
------------------------------------------------------------------------------
Starting Logical Slot 'Upper' [Users: 1]
------------------------------------------------------------------------------
Device Path: /dev/sci1 | Listening Port: 10000
------------------------------------------------------------------------------

So going by that its reading the card ok, Now i have tried a couple of emu's but not having much luck the best has been mgcamd:

[mg0] stoping camd..
/dev/dvb/card0/ca0 error 16: Device or resource busy
/dev/dvb/card0/ca0 error 16: Device or resource busy
got 52 cmd 9F
[mg0] namespace FFFF0000 t-id 38 on-id 601
[mg0] descramble on 1, source 0
[mg0] service 25A index 0 pmt pid 21 (19)
ECM: CaID: 0x1802 -> CaPID: 0x0692 ProvID: 000000
[mg0] network can't decode
[mg0] pid 0x0692 failed to decode.
[mgcamd] emm started
*EMM: CaID: 0x1800 -> CaPID: 0x0080 ProvID: 000000
*EMM: CaID: 0x1801 -> CaPID: 0x0081 ProvID: 000000
*EMM: CaID: 0x1802 -> CaPID: 0x0082 ProvID: 000000
DISCONNECT **** [Wed Jan 20 00:13:40 2010] Client disconnected...
User: 'dummy' | Current clients: 0
[newcamd] 127.0.0.1:10000: problem, will try to reconnect
[newcamd] Connecting to 127.0.0.1:10000...
[newcamd] Login to 127.0.0.1:10000 as dummy accepted (31ms)
CONNECT **** [Wed Jan 20 00:13:42 2010] Processing incoming connection...
User 'dummy' authenticated [Client: unknown] | Clients: 1
[newcamd] Card data from 127.0.0.1:10000 (34ms):
Userid 0 caid 1802 providers 2
Idents: 005F01 005F02
DATA **** [Wed Jan 20 00:13:42 2010] Processing card data request...
Username: dummy | Logical slot: 'Lower' | Card data sent successfully.
DISCONNECT **** [Wed Jan 20 00:14:13 2010] Client disconnected...
User: 'dummy' | Current clients: 0
[newcamd] 127.0.0.1:10000: problem, will try to reconnect
[newcamd] Connecting to 127.0.0.1:10000...
[newcamd] Login to 127.0.0.1:10000 as dummy accepted (31ms)
CONNECT **** [Wed Jan 20 00:14:15 2010] Processing incoming connection...
User 'dummy' authenticated [Client: unknown] | Clients: 1
[newcamd] Card data from 127.0.0.1:10000 (34ms):
Userid 0 caid 1802 providers 2
Idents: 005F01 005F02
DATA **** [Wed Jan 20 00:14:15 2010] Processing card data request...
Username: dummy | Logical slot: 'Lower' | Card data sent successfully. anyone see something i've missed???

[2tone]

i see from another post on another forum you have this working good on you m8 all your hard worked payed off :) :)

[despdan]

i see from another post on another forum you have this working good on you m8 all your hard worked payed off :) :)
Yeh thanks M8 only a few more grey hairs:)
root@dm500 ~ # CONNECT **** [Wed Jan 20 19:01:30 2010] Processing incoming conne
ction...
User 'dummy' authenticated [Client: unknown] | Clients: 1

DATA **** [Wed Jan 20 19:01:30 2010] Processing card data request...
Username: dummy | Logical slot: 'Lower' | Card data sent successfully.

ECM **** [Wed Jan 20 19:01:30 2010] Processing ECM request...
Username: dummy (1 users) | SID: 0602 | Logical slot: 'Lower'
Cache: Miss (1 elements) | Card: Valid control words returned. [773ms]
CW0:CW1 | ################:#############

ECM **** [Wed Jan 20 19:01:36 2010] Processing ECM request...
Username: dummy (1 users) | SID: 0602 | Logical slot: 'Lower'
Cache: Miss (2 elements) | Card: Valid control words returned. [763ms]
CW0:CW1 | ################:################

[joe6915]

Can you explain here how it is done?
I have gone bald trying to get this working

[freck]

There's a lot of peeps trying to do this and little have succeeded....well done Despan,could lead to something interesting.
Freck:top:

[2tone]

Can you explain here how it is done?
I have gone bald trying to get this working

what have you got as in ways of box details

[hatchet]

Well done buddy, any hints ?

[ram1980]

do you get all channels and ppvs

[despdan]

You get what ever the sub is paid for & if you pay for ppv

[ram1980]

no way to descramble it

[satman]

Yeh thanks M8 only a few more grey hairs:)

control words are being found,, dan that is close ...


Card: Valid control words returned.


have couple things to check now,, i) if CW are inverted this may cause some problems,, ( this was the case with n2 ireland )
ii) your actual decoding emu does fully support n3?. what others have you tried?

[satman]

also,, in your cardserver ( rqcs ) is there function to check entitlements of card? can you see all ok entitilements ?

[red devil]

control words are being found,, dan that is close ...


have couple things to check now,, i) if CW are inverted this may cause some problems,, ( this was the case with n2 ireland )
ii) your actual decoding emu does fully support n3?. what others have you tried?

its a combo of CCcam 213 and rqcs and its reading card, clearing channels and a little bit more ;)

[Mooley]

Have 2 DM's sitting here would love to get up and running again, sounds interesting lads.

[satman]

its a combo of CCcam 213 and rqcs and its reading card, clearing channels and a little bit more ;)

Good,,, with the logs dan posted, very obvious its close ;)

[piptaps]

How are the guys reading Satellite N3 cards doing it? Is it different to cable N3?

[red devil]

How are the guys reading Satellite N3 cards doing it? Is it different to cable N3?

im afraid no one is going to post a "how to" for this, to be really honest there arent enough people having a go at it and untill peeps start testing and showing what they have done and look like they want to actually get it sorted no one will give any info, simple as that :ciao:

[satman]

How are the guys reading Satellite N3 cards doing it? Is it different to cable N3?

Well since lack of informative answer il say yes,,, satellite cards n3 are exact same as cable,, well depending on rom, ( ireland is 142, where uk is 180 )
142 used in satellite world for quite a bit now, and has been open on c/s for quite a bit, even with some using dt06 ( no RSA )


im afraid no one is going to po st a "how to" for this, to be really honest there arent enough people having a go at it and untill peeps start testing and showing what they have done and look like they want to actually get it sorted no one will give any info, simple as that :ciao:

Sorry , but cant believe you would answer with such a shit reply.

[satman]

the info is not hard,

boxkey and rsa of card and your laughin.. most n3 compatable cams will work.. but getting rsa probably requires you sending your box away to poland or similar.

in ireland you may survive without rsa if you have no n2 stream ever,, but have went n1>n3, but this is the one much harder to get working ;)

[red devil]

Sorry , but cant believe you would answer with such a shit reply.

thats your opinion, i made an honest reply and stand by it.....


the info is not hard,

boxkey and rsa of card and your laughin.. most n3 compatable cams will work.. but getting rsa probably requires you sending your box away to poland or similar.

in ireland you may survive without rsa if you have no n2 stream ever,, but have went n1>n3, but this is the one much harder to get working ;)


the info on how to do it is widely available but actually gettin the info required is more difficult, boxkey and rsa will NOT be enough in most cases in irl.....
some WILL require a cam_n and that info is not public,
maybe you can enlighten us

[satman]

thats your opinion, i made an honest reply and stand by it.....




the info on how to do it is widely available but actually gettin the info required is more difficult, boxkey and rsa will NOT be enough in most cases in irl.....
some WILL require a cam_n and that info is not public,
maybe you can enlighten us

perhaps you should have just keep quiet and have your own pretty little private server then ;)

i know of at least 3 foreigners who could get you rsa and box details you need,, im sure it wont be long till someone in uk or ireland wise up...

p.s cam_n can be more than one cam,, i know two that are working in portugal with same rom :ciao:

[satman]

three if you inlcude newcs, but of course it only support dt8

[HoTTDubbER]

well this is start of uk cable cs well done mate :)

[satman]

well this is start of uk cable cs well done mate :)

i would imaghine this is ireland c/s cable,,,not uk btw,,,
rom180 another ball game

[coogaah]

Hi all

I'm a novice so would like info on what is a cable dreambox as opposed to the usual "starview" or "eurovox" etc?

Can anyone give me, or direct me to, useful info.

Thanks

Coogaah

[pudzy]

perhaps you should have just keep quiet and have your own pretty little private server then ;)

i know of at least 3 foreigners who could get you rsa and box details you need,, im sure it wont be long till someone in uk or ireland wise up...

p.s cam_n can be more than one cam,, i know two that are working in portugal with same rom :ciao:

and i no one irish guy:puke:

[ram1980]

can i get dish network up in usa with that setup are something like that

[despdan]

im afraid no one is going to post a "how to" for this, to be really honest there arent enough people having a go at it and untill peeps start testing and showing what they have done and look like they want to actually get it sorted no one will give any info, simple as that :ciao:I will have to agree the people that know aren't talking or sharing info, & i will go one further i've shared info & had NO help in return from most.


Good,,, with the logs dan posted, very obvious its close ;)
I think you missed something have it working on all channels :aetsch:

[red devil]

I will have to agree the people that know aren't talking or sharing info, & i will go one further i've shared info & had NO help in return from most.

thats more or less what i tried to say earlier, but you have a way with words lol



I think you missed something have it working on all channels :aetsch:

and again i did say that in post #13 but it must not have been seen :vollkommenauf:

[satman]

I will have to agree the people that know aren't talking or sharing info, & i will go one further i've shared info & had NO help in return from most.


I think you missed something have it working on all channels :aetsch:

it didnt say that in the original post,, hence why i bothered replying, first i had seen thread!

if you have channels then dont see the problem,, nice one.

p.s for the record,, rom142 i know for sure works with
-sbox
-scam
-oscam
-newcs ( but only dt8)

here is contact details for one guy who i know for sure can get yous box details and rsa

http://www.boxkey.pl/

..

perhaps a mod should now close this thread, as it title is looking for help, when now no help needed, and the info you need is here,,

edited- just realised now polish guy has site in english http://www.boxkey.eu/

[ram1980]

willl this open a dish network n3 satellite card in usa also

[jumpinjo]

rom180 another ball game

and been kicked of the park ;)

[tomhick024]

Well done Dan!!!:congrats:

[collito63452]

:help:
I will have to agree the people that know aren't talking or sharing info, & i will go one further i've shared info & had NO help in return from most.


I think you missed something have it working on all channels :help:
i usedm500c need help with multichoice barbados they are testing nagra3 lost many channels i am new at this pm me

[ripmaster]

Well done dan hopefully we will all get the details one day of how it is done congrats

[collito63452]

still lost every thing sounds like greek to me

[Fano]

Any updates on this over the last few months ?

[hatchet]

the info is not hard,

boxkey and rsa of card and your laughin.. most n3 compatable cams will work.. but getting rsa probably requires you sending your box away to poland or similar.

in ireland you may survive without rsa if you have no n2 stream ever,, but have went n1>n3, but this is the one much harder to get working ;)

RSA from the card?

If you get that then you've hacked N3.

You obviously mean the public RSA from the box.

[pudzy]

Any updates on this over the last few months ?

people have it working i read on this thread and other sites m8, its like new toy get it working move on to something new, i quess thats why thread dryed up with post.

[Ginkman]

sounds like some super work was done here, great stuff Dan..
but it all goes over my head a bit, is this a fix for the dreambox on N3 if you have the new card from -pc..

[cocoh]

hello ..
For nagra3, what to take ... :
Dreambox HD
TT_Connect S2-3650 CI

which is more appropriate?

[oweny]

m8 what programme do u use to read your card and unlock it s ican try mine i have a dreabox aswell