PDA

View Full Version : Eeprom location dashboard Honda Click



Jackfruit
28th November, 2020, 05:51 PM
Could anybody explain me where is eeprom here?)) I dont see it on microcircuit... and how to connect? (Honda Click 125cc 2015). Thanks
764889

kamen zashev
28th November, 2020, 06:00 PM
Hi! ic 401?

Jackfruit
28th November, 2020, 06:08 PM
Hi! ic 401?
It is much smaller than eeprom, as i know in this model must be 24c04
764911
judging by the marking, it is 24c04
765043
But what type of eeprom it is? It is so smaaall.
765044
Is this adapter field for it?

Or eeprom is in CPU?

kamen zashev
29th November, 2020, 07:10 PM
Adapter need...

Jackfruit
30th November, 2020, 02:16 AM
What adapter need?

Jackfruit
4th December, 2020, 05:12 AM
Nobody knows?

Auto Clinic
4th December, 2020, 08:33 AM
You need this adapter for it.

https://www.ebay.com/itm/NANO-Micro-93C66-C76-C86-EEPROM-Adaptor-Socket-MSOP8-to-DIP8-fit-UPA-USB-Iprog-/254245061829

Also if you don’t have it then you can connect it via wires or make PCB yourself to normal programmer.
It is easy and take time five minutes .

Jackfruit
4th December, 2020, 09:51 AM
You need this adapter for it.

https://www.ebay.com/itm/NANO-Micro-93C66-C76-C86-EEPROM-Adaptor-Socket-MSOP8-to-DIP8-fit-UPA-USB-Iprog-/254245061829

Also if you don’t have it then you can connect it via wires or make PCB yourself to normal programmer.
It is easy and take time five minutes .


So is it this chip - eeprom what i need?
Can i use this pcb for it? Size is the same)
And could give pinout for wire connection?
766372

Auto Clinic
4th December, 2020, 03:49 PM
So is it this chip - eeprom what i need?
Can i use this pcb for it? Size is the same)
And could give pinout for wire connection?
766372Yes, it is good

فرستاده شده از SM-G935Fِ من با Tapatalk

Jackfruit
4th December, 2020, 03:53 PM
Thanks, will try)

Bryanlocksmith
4th December, 2020, 04:25 PM
Uma has this eeprom place Simon Touch selling it

Jackfruit
4th December, 2020, 05:09 PM
And what about pinout for wire connection?

digimile
4th December, 2020, 08:02 PM
hi
try these pin may help
thanks

MECANPRO0499
8th December, 2020, 04:22 AM
767257Buy this jackfruit

Jackfruit
8th December, 2020, 01:51 PM
I have desoldered it. Have red, but again cant write it. What's the shit happens(((((((((
Adress error:0h.
Before i used another eeprom, and problem resolved, but this eeprom i dont know where i can buy more..
Mb problem really in programmer coz it is very primitive: ezp2019+
Cant imagine that nobody have same problem. Damn.

Or mb somebody knows what type is it eeprom?quadratic, about 3x3 millimetre, 8pin.

Problem resolved with writing resolved by using another programmer

Jackfruit
9th February, 2021, 11:46 AM
hi
try these pin may help
thanks

Are you sure that on 4pin (vss) need put 7pin upa? Mb 5pin?

digimile
9th February, 2021, 05:31 PM
hi
24cxx ...1,2,3,4,7 of eeprom all connected....so u can use any of these pin....check upa manual....try these may pins and all should be ok
thanks

Jackfruit
9th February, 2021, 06:27 PM
784353so i can use any of upa pins 3,4,5,7,8 for connect to 4 eeprom pin ?