View Full Version : AUDI A4 B9 2.0TDI EDC17C74 DPF OFF
gmon16
16th December, 2020, 08:51 AM
Hi
I am looking for good DPF off solution to VAG EDC17C74 VER2 or damos to this ecu. Thanks for "swiftec", "ADS", "ESS", "ECU Solutions" and others "ready files". It doesnt work! In this sw place where in all vag edc17 was dpf switch, doesnt exist. I am looking for manual, working solution or correct damos.
Thanks
ecuprogramer
16th December, 2020, 10:04 AM
Hi Swiftec solution good and worked ok, you didn't do something well
Reset DPF for diagnostic after write swiftec modi software and
BOSCH EDC17C74 - SWITCH SOLUTION. DPF PRESSURE AND TEMPERATURE SENSORS MUST BE DISCONNECTED!
gmon16
16th December, 2020, 11:31 AM
no its not working for this sw version
DreamDancer
18th December, 2020, 06:03 PM
i also could not find switch and matrix maps like they are in EDC17C64.
just some thoughts.. what about disabling relevant dtc's and zero out post injection maps? shouldn't that also work without limp mode?
ecuprogramer
18th December, 2020, 06:25 PM
gmon16 (https://www.digital-kaos.co.uk/forums/member.php/515795-gmon16)
Hello everyone, here's a worked solution
1 - Reset Particulate Filter Parameters and soot counter
2 - Delete all dtc from the ECU
rep+big thnx press button all
pike
19th December, 2020, 04:58 AM
no its not working for this sw version
Hi,
like many, so swiftec do not know location of switch PFlt_swtActv_C
that's why it doesn't work
ecuprogramer
19th December, 2020, 10:22 AM
I didn't make it with no swiftec, I made it differently and it works 100%
AVDigitale
19th December, 2020, 01:24 PM
we have manual solutuion for this
AlexS999
25th June, 2021, 04:18 PM
Good day! How I can take password?
gmon16 (https://www.digital-kaos.co.uk/forums/member.php/515795-gmon16)
Hello everyone, here's a worked solution
1 - Reset Particulate Filter Parameters and soot counter
2 - Delete all dtc from the ECU
rep+big thnx press button all
ramseypharm
16th November, 2021, 01:08 AM
Hello brother
I need password i ve same car ,same ecu, same problem, many dpf off file they didn't work, thanks in advance
maxxy
14th November, 2022, 07:05 PM
gmon16 (https://www.digital-kaos.co.uk/forums/member.php/515795-gmon16)
Hello everyone, here's a worked solution
1 - Reset Particulate Filter Parameters and soot counter
2 - Delete all dtc from the ECU
rep+big thnx press button all
Hi ecuprogrammer
Is there a chance to receive pass for your file?
Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.