honda civic 2017 a problem with VSA EPS after clea airbagr by cpt(77960 -tgg-a020-m2)

[bilalalib1]

hello dears,
is there any solution for honda civic airbag after clear by cpt..airbag off but i have all the followwing are on -- Hill Assist,
Electric Power Steering
VSA System.

i didnt save original file...... to

is there a way clear the epe, vsa and hill assist.

its only gives error u0151-00 epr fcan malfunction (eps unit-srs unit

[Hondasilver]

Hi did you try drving the car and see if it will reset on it own?
Also you may need a good scan tool to access and Reset/Calibrate those Systems you mention.
Like Honda HDS ,Autel etc., Xtool .
I have both Honda Hds and Xtool PS90


I have a 2018 Honda civic Hatchback Touring at my shop with the same SRS ECU Part number.
That I reset the SRS Crash codes a few weeks ago and the SRS light is gone.
But the VSA is still on .So I will check tomorrow and see what other reset procedure works to remove those VSA and others light that is on.
And keep you updated to what i discover.

[vertyk]

Need calibrate tpms ( settings- vhicle- tpms calibration), then calibrate all sensors in abs. Launch good for this . Inspect fuses and wiring

[vertyk]

this clear files dflash and cflash for compare and education only

[habs44]

any luck? I also cleared 18 Civic 77960-TBA-A040-M2 (R7F701A222) using Airbag Service Tool. Airbag light off but Traction Control light on. DTC U0416:68 VSA System Malfunction. Was there before but not sure if the clear cause issue with yaw rate sensor data in SRS module. Unable to calibrate VSA w Autel and Launch. Calibration fails. I heard you need HDS to do this, not sure if true.

[Hondasilver]

Plug in HDS today on mine and throw codes U0151-00 F-CAN EPS
Also U0416-68 VSA System malfunction.
But on the Speedo info screen it says Drive carefully System initializing.
So i am assuming i have to take the car for a drive to relearn .
Wth HDS i couldn't get access to TPMS.

[bilalalib1]

thanks friends for your reply. next weeek the customer will get the car back to me.but i drove it before for a short distance and vsa was still on...

[bilalalib1]

will try them next week

[bilalalib1]

i see that you send the full memory file 512 kb ( civic_full_a22_cfl.bin).. is it clear from working module

[habs44]

Any luck calibrating the ABS?

[habs44]

any luck? I also cleared 18 Civic 77960-TBA-A040-M2 (R7F701A222) using Airbag Service Tool. Airbag light off but Traction Control light on. DTC U0416:68 VSA System Malfunction. Was there before but not sure if the clear cause issue with yaw rate sensor data in SRS module. Unable to calibrate VSA w Autel and Launch. Calibration fails. I heard you need HDS to do this, not sure if true.

I purchased HDS subscription. Was not able to calibrate. It says: Wrong Condition (Lateral Sensor Error, Longitudinal Sensor Error, Yaw Sensor Error. Retry the sensor calibration.)

No help from Diagcar.eu. Does anyone have a cleared dump I can paste and try?

Thanks!

[Hondasilver]

Try doing a new post and attached the crash file and someone may help you .

Also, I noticed you mention the wrong memory type.
Please correct it to Memory type is Renesas RH850 R7F701A223....

Good luck

[SHD22]

I also had this issue, on an Honda and Toyota cars, again with the CPT, the air bag goes away but traction comes back even if it didn’t have it before and on Honda’s sometimes it has air bag light off but the traction never goes away. We end up buying a new module, install and that’s it. Nothing else is needed after that. Never had an answer from cpt about this issue.

[Hondasilver]

Habs44 , I Connected HDS on mine today, said same thing as yours ,Wrong condition.
Also tried my new xtool PS90 advance scanner , it say "Sensor Calibration in process . Please wait.
But just stuck there .
Currently ther is no codes , but as soon as you drive , codes pop up.
Any update if you got urs fixed?

[qubits]

HI Guys.
It's airbag dump problem. If you look at the live data in ABS you'll see why....
Basically you need a good clear. HDS is not going to fix that.

[Hondasilver]

Hi friend, do you have a good clear dump you can share?

[qubits]

Nope, I'll looking too. I still need to find the original dump and try to clear it myself.

[Hondasilver]

Here is my original Crash dump.

Both front seatbelt were activated from a front end collision.
Airbags intact.

[habs44]

I ended up finding a problem with AST clear. It was one line that shouldn’t be deleted. Line 2680. In fact I pasted the line from a good dump. Sent him the fix. I think he resolved it in the app.

[Hondasilver]

Hi habs44, Try 2 did not work for me . With it I couldn't get access to Reset abs sensors.
But another user manually cleared my orig crash file, and when i turned on Ignition , the
SRS light came off, but with his file , i got access to Recalibrate ABS sensors .
And all the warning lights came off.
Attached is the cleared file that worked for me.
I used Xtool PS90 to Recalibrate Abs sensors.
Note: Xtool wont Recalibrate SWS ( Seat weight sensor ) is you ever run into that situation.
Honda Him ( Chinese clone ) will do.

[Marcins70r]

Hello

Honda Civic 2019 SRS 77960-TGG-A030-M2
After clearing the dump in the airbag unit, error in the ABS unit U3000-54 "Sensor Calibration is not Complected", which cannot be removed. Now the unit SRS on the CAN bus transmits incorrect data on vehicle acceleration and does not fulfill the calibration conditions. The acceleration value is 1.74, and should be within the range of -0.2 +0.2. I do not know who removed the collisions and with what tool, I only know that he removed and repaired the srs but they appeaerd errors ABS VSA EPS TMPS etc. Can someone help me fix the file?
Read by VVDI

Regards

[ANASSALSULTANI]

can i have the pss please