melcool
30th January, 2010, 12:19 PM
Ford Focus up to 2003 (-2003)
For those that don't like to connect pin 1 and 2 from the v.2 processor
Test Point 46 (TP46)
*NOTE: -is some version of dash it not exist
-check with multimeter the continuity from MCU pin 2 to TP46
Also in I have found in Tacho Universal Ford Focus English and German manual a big mistake :
26pin white port
• Pin 2 GND(-) black
• Pin 9 RX (Data) blue
• Pin 11 TX (Data) yellow
• Pin 14 12V (+) red
• Pin 16 12V (+) red
This is wrong
The correct connection is like in the picture of German manual and that means:
• Pin 9 RX (Data) yellow
• Pin 11 TX (Data) blue
see my picture also!
*NOTE:
It will show ...working... for aprox. 60 seconds so please wait for programming complete!
For those that don't like to connect pin 1 and 2 from the v.2 processor
Test Point 46 (TP46)
*NOTE: -is some version of dash it not exist
-check with multimeter the continuity from MCU pin 2 to TP46
Also in I have found in Tacho Universal Ford Focus English and German manual a big mistake :
26pin white port
• Pin 2 GND(-) black
• Pin 9 RX (Data) blue
• Pin 11 TX (Data) yellow
• Pin 14 12V (+) red
• Pin 16 12V (+) red
This is wrong
The correct connection is like in the picture of German manual and that means:
• Pin 9 RX (Data) yellow
• Pin 11 TX (Data) blue
see my picture also!
*NOTE:
It will show ...working... for aprox. 60 seconds so please wait for programming complete!