VW phaeton kessy Pin and CS

[vas100]

Hi mate ,
can someone calculating Pin and CS from Kessy on phaeton 2010 from AVDI is wrong is kessy after 2008 thanks

[pouleddy]

Hi, by kessy dump no tool can calculate correct yet, try read ecu dump to get pin and 6byts CS. why you ask for this pin & cs?

[vas100]

hi is donor Kessy old is watter damage . Ecu is on scrapy not posible now. I try change online thanks.

[dimon9555]

by kessy dump no tool can calculate correct yet,

Man,if you don't know anything about Kessy Continental, then it is not necessary to write that it is impossible to calculate the CS and PIN and other immo data by dump

[vas100]

Man,if you don't know anything about Kessy Continental, then it is not necessary to write that it is impossible to calculate the CS and PIN and other immo data by dump

man i know something about kessy. When there is a problem with the 139D then the options are here. Abrites Tmpro Tango VVDI2 and others can't count. He should be able to do it for the money it cost. Oddis didn't give it online. But I can thank you.

[lion0304]

Continental Kessy, you need VVDi or MK3 prog and read eeprom in circuit to get correct pin Pin + CS.

[pouleddy]

Man,if you don't know anything about Kessy Continental, then it is not necessary to write that it is impossible to calculate the CS and PIN and other immo data by dump
OK Man, above you have the kessy dump, i am waiting your result show us the correct CS AND PIN. for me TMPRO can by soldering it show us the pin, but there is no tool yet can show you pin + CS by loading kessy dump.

[ghitab]

lion0304 (https://www.digital-kaos.co.uk/forums/member.php/432326-lion0304) is right, read kessy by vvdiprog menu and then load file to vvdi and will show you pin and cs. I tested on same 3D0909139D as yours.
pouleddy (https://www.digital-kaos.co.uk/forums/member.php/420553-pouleddy) vvdiprog read aditional 256 bytes need for calc cs and pin.