Dash audi A3 8p 2.0 tfsi, It does not turn on

[xln]

Hello friends, I have a problem with an audi a3 2008 2.0tfsi, with dash 8p0920932a. after reading the microprocessor micronas (to make a key copy) the board died.
I attach the read files.
Can someone help me?
Thanks

[A3fDevil666]

Read with ?

[xln]

Read with ?
Smoke programmer

[xln]

Smoke programmer
I need original or repair file. Help!!!!!

[Stelaras26]

resolder all very carefully again.
THEN.........

HERE IS SOLUTION:

read it again and verify if it is ok to continue


go to Adress F7FE8 you can see probably all is FF FF ....

JUST MAKE like this


FF FF FF FF FF FF FF FF 5E 00 00 EA AA AA 55 55


Micronas mcu is tough and easy to die unfortunatelly
IF not powering up after this job then you probably did something else

[xln]

I'll try thanks!


resolder all very carefully again.
THEN.........

HERE IS SOLUTION:

read it again and verify if it is ok to continue


go to Adress F7FE8 you can see probably all is FF FF ....

JUST MAKE like this


FF FF FF FF FF FF FF FF 5E 00 00 EA AA AA 55 55


Micronas mcu is tough and easy to die unfortunatelly
IF not powering up after this job then you probably did something else

[xln]

Can I read and write with xprog?

[Stelaras26]

OF course.Search here in forum for correct pinout,xprog has already pinouts in dashboard section.