yarowsc
18th February, 2022, 10:26 AM
I am posting the topic here because I mistakenly entered it in the "locksmith" section ;
Audi A6 C6 2006 year 2.7TDI Quattro, changing the air suspension to the usual standard. Suspension changed, mechanically ok. Air suspension service, encoded from; 03-ABS, 07-MMI 2GHigh, 17-Dashboard, 19-CAN Gateway, 55-light module. There is no invalid coding error in any of the modules. In the MMI 2G, in the green menu, "air suspension" has also been removed. The 34-Air Suspension module has been disconnected and disassembled. After recoding, only in the "55" light module, there are two errors about the lack of communication with the leveling sensors and an error from the basic settings (but you need to redo the installation, with pneumatics there are four sensors and the installation goes to the "34" module, there are two without pneumatics sensors, the installation goes to the module "55" - the sensors also have to be changed, because they are different, but this is not a problem). the problem is as follows; there is no error in any of the modules, the air suspension has been encoded, and the yellow indicator light with the "air suspension" symbol lights up on the dashboard. what this is about ???
Audi A6 C6 2006 year 2.7TDI Quattro, changing the air suspension to the usual standard. Suspension changed, mechanically ok. Air suspension service, encoded from; 03-ABS, 07-MMI 2GHigh, 17-Dashboard, 19-CAN Gateway, 55-light module. There is no invalid coding error in any of the modules. In the MMI 2G, in the green menu, "air suspension" has also been removed. The 34-Air Suspension module has been disconnected and disassembled. After recoding, only in the "55" light module, there are two errors about the lack of communication with the leveling sensors and an error from the basic settings (but you need to redo the installation, with pneumatics there are four sensors and the installation goes to the "34" module, there are two without pneumatics sensors, the installation goes to the module "55" - the sensors also have to be changed, because they are different, but this is not a problem). the problem is as follows; there is no error in any of the modules, the air suspension has been encoded, and the yellow indicator light with the "air suspension" symbol lights up on the dashboard. what this is about ???