2013 Lexus is 300h F-SPORT

[uck]

Hello
I need help with my car 2013 year.
something went wrong with my bin and now the car doesn't show my mileage. The field is empty, without numbers.
I have the original .hex file, which also returns nothing when I return it. The equipment I have is PT809F and NYO4.
Original mileage is 351k approximately. I need 150k please.

chip : s-93a66

[SebaGTC]

Test and report. If it does not work, provide the part number of your meter. You will have to look for the file as yours may be corrupted.

[uck]

Does not work with this one either. what number should i give you? Where is?

[jomberykaso]

write this file in BIN format.... NOT hex and you will see 150000 kms, original is 351554 kms .....anyway i upload 2 options for you

[uck]

I did it and the result is the same. No mileage readings

[jomberykaso]

Not possible, i am 100% sure my files are good. But first you need to get a better eeprom programmer, buy "upa 1.3 programmer" to write my bin file

[uck]

Hello again,
To share the experience I gained with this board.
It turned out that the F-sport speedometers look the same, but in reality they are not inside.
I bought another speedometer, which looked the same as mine with the difference that it is from a new IS300H 2018 and it is not in km, but in miles (easily changed from the menu). But when I put it on the car the alarms came for pre-collision system and line departure . Тhe turn signals also started clicking without the actual lights on the outside of the car coming on.
I disassembled and compared the boards.

They have nothing in common!
Еven their memories are different: the older s-93c66 and the new s-93c86.

The two odometers also have a small difference in the part numbers:
the old 83800-53G40-H
the new 83800-53G44-B


Now I'm looking for a odometer or bin of my type, and I offer you a working bin with a few km of the new type, so you don't play like me.

[uck]

Hello again!
Update on the topic:
I bought another odometer 83800-53G40
everything is now working, but a new error appeared. It says on the display Check LDA System
My car does not have LDA System!
The error came with the odometer change. Can anyone help and turn this off?
and the new bin
93а66

[uck]

Not possible, i am 100% sure my files are good. But first you need to get a better eeprom programmer, buy "upa 1.3 programmer" to write my bin file

You are absolutely right! Your file works flawlessly. In my case, the problem turned out to be burnt mileage.
Thank you so much!