Toyota VIOS and iProg Issue

[toastedsiopao]

Hi, I cannot make iProg read Toyota VIOS 2017 model via DENSO UART, does anybody has a work around or modification done?

Yes, I am using a cheap China Clone, sorry.

[brend]

What you try read , mcu or external eeprom ?

[toastedsiopao]

It is good in reading other dash via mcu or eeprom, just don't work with VIOS.

I am using the DENSO mode UART.

[brend]

It is good in reading other dash via mcu or eeprom, just don't work with VIOS.

I am using the DENSO mode UART.


So........ in this VIOS you try read both memory ?

I think in here external eeprom .
Why not just desolder for work and that's it ?

[hcip]

It is good in reading other dash via mcu or eeprom, just don't work with VIOS.

I am using the DENSO mode UART.

I always use it without problem,
Maybe there is something wrong about your connections

[toastedsiopao]

Hi is that your own script? Can you share it?

THanks.

[Geryy]

Script presents in iprog clone

[toastedsiopao]

Did you connect the 12V from the iprog board or from separate supply?

[Geryy]

from separate supply

[hcip]

Did you connect the 12V from the iprog board or from separate supply?

Depend on your adapter, My adapter need to connect 12V on Iprog+ hardware

[mackynax]

iprog clone also not work

[hcip]

iprog clone also not work

My Iprog is clone.. serial number 0001

[fuzz1]

My Iprog is clone.. serial number 0001
Hi
Your iprog looks very different hcip.
I bought clone serial number 1 however the soft is not as clean as yours. Mine shows v87. I'll try the other version i guess to see if i get different results

[hivrich]

My Iprog is clone.. serial number 0001

Hello.
I want to write you a message, but your message box is full.

[mainsmains]

i recently bought iprog clone and i need assistance on how to do in circuit reading of the eeprom lets say 93C56