PDA

View Full Version : Fiat 500c BCM swap problem


electro10
11th August, 2022, 03:14 PM
Hi all,

I have a Fiat 500C, 2011 year, with original BCM damaged. I bought another but with different partnumber (I didnīt found the same partnumber).

So, the problem: original BCM has 93C86 EEPROM, new (used) BCM has 70F3632 MCU. I have the files from both (in attachment). Now, the solution is make the new virgin and program new keys? someone can make virgin, please?

Thank you a lot
Bllinda
11th August, 2022, 06:51 PM
Requires NEC Dflash and Pflash new 70F3632.bin
electro10
11th August, 2022, 07:05 PM
Requires NEC Dflash and Pflash new 70F3632.bin

Is necessary read Dflash and pflash from new BCM? Do you have pinout for this? I have xprog, IM608, for example.

And to read this MCU the data will be lost, no?

Thank you
Bllinda
11th August, 2022, 07:34 PM
That's how you should read it ....
electro10
11th August, 2022, 10:57 PM
That's how you should read it ....

So, in your opinion I should read the data (and the data will be lost) and after post here? Can you will help me, replace dflash and pflash with data from 93C66 of old BCM? If yes, itīs great! :D

Can you tell me pinout to read this? IM608 only has pinout to read 70F3379...

thank you a lot!
Bllinda
15th August, 2022, 05:32 PM
How to read about it and we will talk.
electro10
19th August, 2022, 02:06 PM
Sorry by no answer before!

I will try buy a BCM with the same partnumber, because I was no able to read NEC...
issam216
19th August, 2022, 03:29 PM
why you didn't think to verginize your ecu and work with the new bcm data may be sould be better solution
tato10
20th August, 2022, 12:29 AM
Hi all,

I have a Fiat 500C, 2011 year, with original BCM damaged. I bought another but with different partnumber (I didnīt found the same partnumber).

So, the problem: original BCM has 93C86 EEPROM, new (used) BCM has 70F3632 MCU. I have the files from both (in attachment). Now, the solution is make the new virgin and program new keys? someone can make virgin, please?

Thank you a lot

bcm with 93c86 and new with nec are not compatible, if you check it in nec bcm you have a blue connector and not in the original, that connector is gray, you must look for the same model, it does not matter if it is a different part number, but check connector colors.
then you just have to program a new transponder and virginize the ecu.

dont forget give tanks if i can help you