CGDI BMW feedback

[atomiczen]

write here any feedback about this tool, that seems now nice, after some update

i used this tool to reset mileage and program key on fem-bdc without problem.
never used on cas4 obd, anyone have experience with it?
need to reset mileage obd on cas4 f10 year 2011, safe?

[karmoranas]

on cas4 not tested, but cas3 never make milleage by obd.... better and faster on bench

[brend]

I have this tool .

Bench work.........
Never had problem with cas 4 .....from me 100% safe .
Also for cas 1, 2 , 3 work well without problem .

[qwojtus]

No more CAS4 removing, OBD only. Very rarely problem but always easy fix.

[brend]

No more CAS4 removing, OBD only. Very rarely problem but always easy fix.

obd2 for cas4 not safe 100% , always risk's wait same surpraise .

In bench , no this problem ....................this is especially important when no time play .

[Viliuxxx]

And how does it work with Cas4 via soldering piont to mcu ? Safe?

[atomiczen]

obd2 for cas4 not safe 100% , always risk's wait same surpraise .

In bench , no this problem ....................this is especially important when no time play .
tested obd today
after connect, software ask me to downgrade cas4 firmware, after have done car don't start, lot of warnings on dash, wipers active everytime
tried to restore backup, no differences
flashed from bmw programming menu, everythings now work ok.

try again or try bench?

[brend]

tested obd today
after connect, software ask me to downgrade cas4 firmware, after have done car don't start, lot of warnings on dash, wipers active everytime
tried to restore backup, no differences
flashed from bmw programming menu, everythings now work ok.

try again or try bench?


About cas4 .........!!!

I told before .......... obd2 work not safe !!! .......and this position with all tool .
Only bench work safe !!!




And how does it work with Cas4 via soldering piont to mcu ? Safe?

Mr.Viliuxxx

Read better what in here in this thread people write and don't ask agane same question which before asked !!!

[qwojtus]

From around 50 CAS4 via OBD ( mainly doing keys) I had issue twice. For me very safe OBD but many dont trust yet.

[hesham10]

No more CAS4 removing, OBD only. Very rarely problem but always easy fix.

Fix is writing p flash with bdm programmer like vvdi prog

[brend]

From around 50 CAS4 via OBD ( mainly doing keys) I had issue twice. For me very safe OBD but many dont trust yet.


And of course all this job with cgdi bmw ??