Ford H1BT-14B321-AJ

[shooting]

Ford H1BT-14B321-AJ

How do I get a dump from this module? no visible eeprom inside



wbr

[eciepecie]

Hi,
Your module crash data in MCU:
Memory type - Infineon
model - TriCore SAK-TC222S-16F

[fuzz1]

Hi
Post of the photo both side of the board. What programmer do you have?

[eciepecie]

Connection jtag from smok

[shooting]

Hi
Post of the photo both side of the board. What programmer do you have?

I have 100's of tools, what's needed?


wbr

[shooting]

Connection jtag from smok

Don't have JTag



wbr

[fuzz1]

Hi
Smok vvdi cg100 CPT...

[shooting]

Hi
Smok vvdi cg100 CPT...

Don't have Smok vvdi cg100 CPT



wbr

[mkopytekchi89]

carprog, read through obd no removal necessary, read, save,clear,write,clear fault code in passenger seat weightmodule, Done. 25 minutes.

[shooting]

carprog, read through obd no removal necessary, read, save,clear,write,clear fault code in passenger seat weightmodule, Done. 25 minutes.

I have 10.93 CarProg, I can't see this option, what do I set it to?


wbr

[diags]

this pinout with CPT same pinout upa;s

[shooting]

this pinout with CPT same pinout upa;s

Read Post#6



wbr

[fuzz1]

this pinout with CPT same pinout upa;s

Hi

How do you read tc222 or other tc chips with UPA? You tried and succeeded to read tc chips with UPA?

Thanks

[shooting]

Returned to owner


case closed

[tango]

carprog, read through obd no removal necessary, read, save,clear,write,clear fault code in passenger seat weightmodule, Done. 25 minutes.

can you give more info for this please as asked above
i also would like to know how you did it by obd with carprog (was carprog original or clone ?)
was carprog online or offline etc etc