Which tool for BMW G Series ? Mileage correction - Cluster + CAS/BDC/FEM / keys

[mattourcl]

Hi there
as the title says,
does anyone know which tool can be used to do the BMW G Series 2018-2020 ?
for G30 - G01 - G02 etc...

looking for a tool that can do mileage / keys - without filters!

let me know
thanks

[tech_cz]

BDC2 - nothing

WBR, Marek

[mattourcl]

BDC2 - nothing

WBR, Marek

So there's no way to do a G Series BMW?

[brend]

.....................................clear .

[figani]

So there's no way to do a G Series BMW?

dash is possible without filter...
even all by obd, but it depends of the HW/SW no...
check site of bmw explorer...

and yes it works, I´ve done two g series...
they cut synchronozation in dash/flash...

[brend]

..................clear .

[mattourcl]

dash is possible without filter...
even all by obd, but it depends of the HW/SW no...
check site of bmw explorer...

and yes it works, I´ve done two g series...
they cut synchronozation in dash/flash...

Got two cars to do -
07/2017 and 12/2018 - probably need to check if it would work

anyone in europe that can do it for $$ ?
if so pm me and tell me how to proceed for it

[brend]

.....................clear .

[mattourcl]

Stop spam same thing !



You have all answer for this job with this car in this thread .

What's the problem now you have ?

i do have answers, but i'm not able to do it! so i could be looking for someone who can do it maybe???
that sounds pretty normal !

[TheNine90]

For new millage only filter and if millage in increment area + new eep or eep emul , and for obd2 second filter !
For new key's only diller !

Can you explain what you mean by increment area. Do you mean mode 1 and 2 where km is stored in first two rows?

[brend]

...................clear .

[markony79]

I was get Bmw G30 , 2021 ...to do mileage ...Coustomer will do 100% NO CAN FILTER can make that in KEYS show new KM like in dash
Even you get FULL Led dash and need Special Can filter ...this just Block the BDC_IKE ...
OBD fllter if you put its same KM like in DASH....but not change the KEYS km, if you put in BMW dealer to read the Kyes for sevice

I was in BMW dealer, and they tell me that BDC is not posible to buy it if it the car is 2020 and up .
Before 8-9 mounths i was get bmw 2018, 2019, and i was tell the coustomers , that only OWNER off cr can order and bring it to finish the jobb.
BDC was price in Euro arond 850eu..and with ISTA online from Goran in Crotia , i make the cars

i need info if its i am wrong, or this its just in Sweden

[qwojtus]

If he had an explorer , he wouldn't 't be asking questions here .

And if km in increment are , no away to do this obd2 away , explorer work only without increment .

Explorer is useless for G series, I have this authorization since appeared.

Just double check which models it supports to understand.

[sepistar]

which filter do you use guys for g series?
br.

[flajszi]

Hy all!
Since you’ve done this before, I have a question for they: For the G series, is the BDC2 currently only manageable with a filter. (yanhua id7 can filter)
What about ISTA diagnostics— which value will it display (BDC2 or cluster)? And what about the BMW mobile application? It also displays the odometer reading. Regarding the keys, what should I expect?
Thank you in advance for your response!