BOSCH ME7.4.4 immo off No Pass

[Hayssam1]

Try this file
IF I HELPED YOU, PLEASE REMEMBER TO PRESS THANKS

Bosch ME7.44 - Citroen Peugeot
CitroenC2 1.6125HP 2003-2009
Citroen C2 14 72HP 2003-2009
Citroen Saxo1.1 60HP 1995-2003
Citroen Xsara Picasso 1.6 109HP1998-2012
Peugeot 10071.6 16V 109HP 2004-2009
Peugeot 3071.6109HP 2001-2008
Peugeot 206 1.6 109HP 1998-2012
Peugeot 106 1.160HP 1996-2003
Peugeot Partner 1.6 109HP 1997-2009


ECU Number
0261208376 (Citroen C21.6 VTS 125HP 2004
0261208191 (Peugeot 1007 1.6 109HP2008)
0261208137 (Citroen C3 1.6 109HP 2006)
0261208101(Peugeot 206 CC 1.6 109HP 2003)
0261207999 (Citroen C2 1.4 72HP2007)
0261207860 (Citroen C3 pluriel 1.6 109HP 2004)
0261207858(Peugeot 206 CC 1.6 109HP 2002)
0261207686 (Peugeot Partner 1.6109HP 2003)
0261207664 (Peugeot 206 1.6 109HP 2009)
0261207477(Peugeot 206 1.6 109HP 2005)
0261207476 (Citroen Xsara 1.6 109HP2002)
0261207474 (Peugeot 3071.6 109HP 2002)
0261207318(Citroen Xsara Picasso 1.6 109HP 2005)
0261206945 (Peugeot 307 1.6109HP 2002)
0261206943 (Peugeot 307 1.6 109HP 2003)
0261206942(Peugeot 206 1.6 109HP 2001)
0261206861 (Peugeot 206 1.6 109HP2004)
0261206860 (Citroen Saxo 1.1 60HP 2002)
0261206633(Citroen Xsara Picasso 1.6 109HP 2000)
0261206606 (Citroen Xsara1.6 16V 109HP 2002)
0261206246 (Peugeot 106 1,1 60HP 2002)

IMMO OFF NO PASS 29F400 and 95160

[gazzaman2k]

hello does this need the checksum calculating during write? or is it just flash and it works? thanks

[Hayssam1]

hello does this need the checksum calculating during write? or is it just flash and it works? thanks

if that works for you you don't have to do checksum it just write flash file and eeprom file

if you want just load your eeprom and I'll try to deactivate the immobilizer from your original file

[simiszer]

Hi,
I am asking for your help. I entered the 2 contents into the engine controller
of a Peugeot 206. It started and worked flawlessly.
I tried again the next morning but it didn't start. What could be the problem?

Thanks in advanced

[ricked]

Hi,
I am asking for your help. I entered the 2 contents into the engine controller
of a Peugeot 206. It started and worked flawlessly.
I tried again the next morning but it didn't start. What could be the problem?

Thanks in advanced

what error codes you have??

[simiszer]

what error codes you have??

Launch X431: Permanent fault key not learned

[mentos7]

Hi, why can't I download files from this thread? Do I need additional permissions?

[lyesdiag]

always the knid boss