I didn't replace BCM, I replaced RFA module.
Last characters not same (F1CT-19G481-AL -> F1CT-19G481-AE), but my informator said it's only software version, so it's good instead of that.
Last days I needed to work other cars, but this Kuga still doesn't start, can't learn key.
I tested antenna's, when I disconnect REAR or FRONT antenna, then I get fault code in rfa (rear fault code, and front fault code. and still always center antenna fault code). So maybe center antenna is the problem, because it's ALWAYS fault code. (When I clear and I try to push start button)
BUT I check wires, good! I cut wires from rfa pinout to take a test, and I try with new wires. I took antenna from the car and I connect NEW center antenna with NEW wires outside car (because I want to test 100% this antenna give signal.) And yes, outside car, I check antenna signal, it's work, antenna give signal. New wires, new antenna, give signal, but "ignition center antenna - B10C8" always fault code.
I don't know.. maybe this rfa also fault, but old rfa also have center antenna fault, so I think it's impossible.
Or BCM fault.. I tried with steering lock emulator (maybe steering lock fault), not. But now I order new steering lock (Sometimes dash show steering malfunction, but I can't communicate without make bridge ignition relay, but if I make I can communicate and no fault code.) But have little mechanic problem. So tomorrow I try with new steering lock.
After that I don't know.. new bcm?
I really don't understand, everything good.
Bookmarks