Radio Qashqai secure problem

[simche]

Regards to all.
Today i replaced the radio unit on the Nissan Qashqai that failed.
Now i have another unit but it just says WAIT on the screen and goes to SECURE.
Please help with this problem?
Can the problem be solved simply by replacing the eeprom from the original device?
I haven't had this problem before. The car is from 2008.



The data from the device that i inserted and that plays on bypass (buttons 4 and power) is attached.
Thank you all very much in advance.

[simche]

I found here on the forum that the immo data is in the eeprom on the other side of the board.
In my case, it is L46. Is there a chance to change only that eeprom to the same radio and it works as if it were original?
Or how can i solve it this the other way? Thanks everyone.

[simche]

I read somewhere on the forum that it is possible to do immo off on the content of the L64 and then it will allow me to enter the code that i am not allowed to now?
Is it really possible for this Clarion model PN-2804F?
Dump attached.
Thanks in advance@all

[Taras+]

https://www.digital-kaos.co.uk/forum...rchid=25637933

[simche]

https://www.digital-kaos.co.uk/forum...rchid=25637933

Something with link is wrong but thank you mate.

[simche]

I solved the problem, and if anyone is interested, i will write it here.
I read the eeprom as 24C64 and manually changed only 4 addresses.
The radio didn't even ask for the code anymore even though i had it. Everything works perfectly.

#308=FF
#309=FF
#30A=00
#30B=00



Regards@all