me7.1.1 with P1681 repair pls

[honingkoning]

could someone pls repair this file for me.

after writting mod file with ori Galletto it crashed, as ussual no help from FGtech.

P1681 active (programming not finished).

thanks guys.

[bobolin4o]

Flash ECU with VCP, or ODIS-E.

[honingkoning]

Flash ECU with VCP, or ODIS-E.

no way to repair eep,car is not here and dont want to drive 1 hour update ecu, drive 1 hour back and write mod file direct to 29F800BB and back again.

would the SGO only update flash or flash and eep btw.

thanks.

if someone could share good working eep that might also be helpfull.

thanks

[bobolin4o]

no way to repair eep,car is not here and dont want to drive 1 hour update ecu, drive 1 hour back and write mod file direct to 29F800BB and back again.

would the SGO only update flash or flash and eep btw.

thanks.

if someone could share good working eep that might also be helpfull.

thanks

Will update flash and will close the session as should.
If need - make immo off first...

[honingkoning]

Will update flash and will close the session as should.
If need - make immo off first...

Immo off to accept flashing on the bench like in edc16???

Wbr

[honingkoning]

Great Thanks after update with odis engineering car Ok again.
I did this on the desk by making Immo off first.
Later i will post crashed eep and repaired eep.

Thanks guys.

[DJGonzo]

http://nefariousmotorsports.com/foru...p?topic=6719.0

[honingkoning]

I have seen this posts but this solution does not work in my file