I need help linking keys with central locking alfa romeo 156 year 2001

[JonConnor]

Hello everyone, I'm new here, I need help if you don't mind. I need to link keys for central locking in alfa romeo 156 year 2001, I have a security code to pair, the keys are fine but I do not have software to link the central locking, the alfaobd does not give me the bodycomputer option, it is as if this option It would not exist in my car, is there a method to link the keys without alfaobd and without multiecuscan? The workshops in my area do not give me support to do this.

I have knowledge of micro-welding, if there was any method to synchronize the keys from the antenna of the central locking control unit I would like to know and apply it.

Thank!



I would have no problem soldering and desoldering any eeprom or chip, making jumpers, working as a laptop and mobile repair technician, which I do not have access to schematics of the central locking antenna to be able to inspect and there would be some way to synchronize the keys ,


I have elm327 bluetooh cable and k-line cable for alfa romeo, but in the alfaobd and multiscan programs they do not give me the option to access the bodycomputer, it is as if this option did not exist in my car

[japn]

Hello everyone, I'm new here, I need help if you don't mind. I need to link keys for central locking in alfa romeo 156 year 2001, I have a security code to pair, the keys are fine but I do not have software to link the central locking, the alfaobd does not give me the bodycomputer option, it is as if this option It would not exist in my car, is there a method to link the keys without alfaobd and without multiecuscan? The workshops in my area do not give me support to do this.

I have knowledge of micro-welding, if there was any method to synchronize the keys from the antenna of the central locking control unit I would like to know and apply it.

Thank!



I would have no problem soldering and desoldering any eeprom or chip, making jumpers, working as a laptop and mobile repair technician, which I do not have access to schematics of the central locking antenna to be able to inspect and there would be some way to synchronize the keys ,


I have elm327 bluetooh cable and k-line cable for alfa romeo, but in the alfaobd and multiscan programs they do not give me the option to access the bodycomputer, it is as if this option did not exist in my car

ok what engine do you have and engine code if possible

[JonConnor]

Hello, good evening, 1.9 jtd 8v engine.
Engine code: AR37101

[JonConnor]

https://drive.google.com/file/d/13QS...ew?usp=sharing

https://drive.google.com/file/d/1ZWa...ew?usp=sharing

https://drive.google.com/file/d/1lgy...ew?usp=sharing

https://drive.google.com/file/d/1FS_...ew?usp=sharing

https://drive.google.com/file/d/1oqD...ew?usp=sharing

https://drive.google.com/file/d/1pAe...ew?usp=sharing

https://drive.google.com/file/d/1rNx...ew?usp=sharing

I wanted to do some research on my own. I have seen a procedure to pair keys on an Alfa Spider 916, take the lock or antenna module and activate the programming mode and link the keys.


I have also seen some numbers on the back of the antenna plate, these are the numbers;


110 930 001 AN1


Are these numbers that the key would have to send to to open the central locking? Sorry for my ignorance because I don't understand much about key programming. If anyone could tell me how to put this locking plate or central locking antenna in programming mode, please help me, while I will continue researching by reading the circuit data sheet until I find a way. to be able to put into programming.


I have seen that they join two contacts in the alfa 916 receiver and make the central locking work again with the key, I would like to do the same procedure

https://youtu.be/xGJvcx9YIg4?si=Re5fRuY6Y3-zqPYz

[JonConnor]

Finally solved, I feel stupid, the AlfaObd application for PC has the option to access the central locking, with KKL cable and pins 11 and 13 joined together.