USB to CAN Interface Recommendation

[wiseman]

If someone could recommend a USB to CAN interface that works with BRP CAN-AM B.U.D.S Software.

A company called Ixxat supply BRP With an interface, it is however 600 euros. IXXAT [USB CAN Interface]

Looking for a cheaper one that would do the same job

[albertros]

Hi,
not sure if this is what you want.
The 4500 comes with can bus analyser

OBD2 Hardware Profis

[wiseman]

Hi,
not sure if this is what you want.
The 4500 comes with can bus analyser

OBD2 Hardware Profis

This is a picture of the stealers setup, i dont require the 2 stroke part of the system, this is for jet-ski`s manufactured by the same company

[kasim_izmir]

If someone could recommend a USB to CAN interface that works with BRP CAN-AM B.U.D.S Software.

A company called Ixxat supply BRP With an interface, it is however 600 euros. IXXAT [USB CAN Interface]

Looking for a cheaper one that would do the same job

Hi , i think best interface here

http://www.peak-system.com/Product-D...x_commerce_pi1[basketHashValue]=c566f24b57&tx_commerce_pi1[catUid]=6&tx_commerce_pi1[showUid]=16

BR
kasim

[wiseman]

Hi , i think best interface here

http://www.peak-system.com/Product-D...x_commerce_pi1[basketHashValue]=c566f24b57&tx_commerce_pi1[catUid]=6&tx_commerce_pi1[showUid]=16

BR
kasim

Could you send me the link again, it seams to be dead or corupt

[oldford]

Choose English, Products and then Can interfaces and you're on the page from the link.

[wiseman]

Choose English, Products and then Can interfaces and you're on the page from the link.

Found it cheers, any other suggestions anyone?