hi all,
i have read through all of the pages on this thread and i am looking at purchasing the new starview box 7 as my starview boxes 2 and 4 are now dead
i was thinking of buying this box
due to being a newbie and reading all the info i can get from this forum. if i were to buy this box can i install the new firmware (version 1.04 downloaded) following these instructions and it might work? do i need to do anything else before installing the new firmware?
INSTRUCTIONS:
option 1
put it on stick, load on to box, dont do factory reset, go to ss1, type in 1819, it should be working, make sure lan connectiion is in, thats how i done mine and its going fine, hope this helps
option 2
after upload of new firmware via pen drive,do channel search,go to ss1,see scramble,press 1819 on remote,see enable,press ok,your on
option 3
1. Copy the file to your USB pen drive
2. Install
3. Restart
4. Do a factory reset
5. Scan for channels in your area
6. When channel scan completes go to a channel and type 1819
7. Wait a few minutes and connection should be established
i hope someone can let me know if i have missed anything off or of anything else i need to do when i buy the box before installing the new firmware.
many thanks
Bookmarks