zenec ze-mc2000.

**soukehal** · 25th May, 2011, 12:42 PM

zenec ze-mc2000.

Hello, for information or what is the code (eprom 24C02 tuner or MCU) thank you) .
The default password of the station is 012345.
j'ait changes the password 012345, mait me is lost again, asking for help thank you.
I have another ZENEC it he exclaimed that he ca!
warning!!!
it is illegal to vieu video
while drining or operating
a motor vehicle.Set parking
brake to view video.
Press HERE to return.
thank you.

**branco** · 25th May, 2011, 01:16 PM

it is english or swahili?
use better translator
we know that master code for zenec 2000 is 012345
if don't work , read mcu

regards

**soukehal** · 25th May, 2011, 01:34 PM

thanks branco!1?)ref: mcu thanks.+ pin.

2?)
I have another ZENEC it he exclaimed that he ca!
warning!!!
it is illegal to vieu video
while drining or operating
a motor vehicle.Set parking
brake to view video.
Press HERE to return.
thank you.

**branco** · 25th May, 2011, 06:34 PM

Originally Posted by soukehal

thanks branco!1?)ref: mcu thanks.+ pin.

2?)
I have another ZENEC it he exclaimed that he ca!
warning!!!
it is illegal to vieu video
while drining or operating
a motor vehicle.Set parking
brake to view video.
Press HERE to return.
thank you.

hi
while driving , video stop for security reasons like others rns systems
you can disable it with small interface
regards

**soukehal** · 6th July, 2011, 08:44 AM

Hi, jtag for information with stk200 pony pino stk miso, mosi, sck, recet, vcc +5 v, gnd ZENEC pino ..... for miso, mosi, sck, tms, vcc +5 v, gnd ....
ec that recet= tms! thank you for any help ..

**soukehal** · 22nd July, 2011, 10:55 AM

I read mcu zenec ze-2000from this radio... and I need code form this dump. Who want to help me..... thanks for all...

**MatygaD** · 22nd July, 2011, 03:24 PM

Originally Posted by soukehal

I read mcu zenec ze-2000from this radio... and I need code form this dump. Who want to help me..... thanks for all...

Code: 025614

Regards
Darek

**soukehal** · 23rd July, 2011, 07:49 AM

MatygaD , Password error thanks.

**soukehal** · 28th July, 2011, 07:11 AM

problem solved by myself

**olmar** · 4th February, 2012, 01:13 PM

help me have a DVD-Zeneca ze nc2040 and does not know the code to read or what to do to work thank you

**girolamodisidisi** · 19th April, 2018, 10:19 AM

Hello Soukehal
How can you solve unlock code for MC2000 radio?
Can you share with us?
Thanks

**mohamad1401** · 19th April, 2018, 11:07 AM

read atmega 1280 and poster dump here

**girolamodisidisi** · 2nd May, 2018, 03:01 PM

Ok ,i try to read atmega1280 ,but how do i use isp pinout from main board?Have to realize a strap or like that to enable isp reading?I use for this job AVR dragon .
I can use jtag mode but i guess i should be remuved off atmega.Can i read atmega if SPIEN and JTAGEN is ..not enable?I know that virgin cip have spien and jtagen...
So...how can red cip?Any tip is welcome!