gopelhu (23rd February, 2016)
I've been reading a 93c46 eeprom, but my interface contains 93C56.
Is there anyone who can help me?
thanks
Original BDM EVC with adapters, SPI EVC, Galep5 programmer, emp11 programmer, upa1.3, kwp2000plus, MPPS, Ktag, Kess, Galletto ofiicial, and many more...
Try with this VAG-COM Revival to properly recognize the device. Then load new dump with MProg.
BR
__________________
If You Like My Post
Please use the button on the LEFT side and the button on the RIGHT side.
Tuning, EGR, DPF, AdBlue, DTC, TVA, Speed Limit, Immo...
amor89 (9th March, 2018), bolke322 (14th January, 2023), cobar (7th April, 2022), Col19 (13th November, 2019), ecufix (9th July, 2014), eriklll (20th January, 2020), exstrigen (1st October, 2023), hendriono (31st October, 2017), jakesman (14th December, 2014), jo?o antonio (4th August, 2016), milerk (1st April, 2017), n599fbm (8th May, 2016), nelumuresan (26th May, 2017), semga (8th October, 2015), temusr (11th August, 2020), tolisnancy (2nd October, 2018), tyrystor (10th July, 2021)
Andrea80 (19th February, 2016)
thanks from me
thanks. used files in first post and all fixed up.
genuine tools owned: too many
genuine software owned: have lost count
thanks im test and work perfectly vag com 908 en
Actual free English dual is for VCDS 11.11.0 is in this post:
http://www.digital-kaos.co.uk/forums...ml#post1647476
Here is loader if it's RL clone:
http://www.digital-kaos.co.uk/forums...ml#post1644621
hi
i have vag com 908 not work with car
please hilp me thanks
yass (27th June, 2013)
temusr (11th August, 2020)
Hi im looking for a ept dump for vag cable 113
Hi,
i have an perfect working cable from sklad how i can dump it to take it here online its the newewst 11.11.5 DRV GErman version
Leo
You needt to read flash and eeprom file from Atmega162 from your cable. You can use Ponyprog or UPA (if you have it).
Ponyprog is easy to use - feev connections nad free LPT port on PC and go
Hi all
Someone corect working dump for ATMEGA162 the Czech version?
10.6.4 and newer?
I do not want it free ...PM
thx
Hello,
I have here an original VCDS interface but it stopped working.
Was working on a SEAT re-coded original Touchscreen radio. everithing went O.K. wanted to go to Instrument cluster for service reset.
and get the Message "not plugged into car".
did interface test, interface found and connected but not plugged into car message.
Green light is "On" did check with 2 laptops and 2 cars always same message.
have last SW on laptop and last Firmware on interface. do you know how to get it running again?
I have FTDI232RL inside with USB VID 0403 and PID FA24.
I have also tried to contact ross-tech but they do not reply to my e-mails.
Thanks for helping.
Greetz
Snatchme
Last edited by snatchme; 13th March, 2013 at 08:58 PM.
macalister (1st August, 2016)
Bookmarks