honda civic 1999 immo

**ninja123** · 27th May, 2012, 01:31 PM

Hi guys, i have a 1999 honda civic with valeo immo box and oki ecu.
been standing for 1 year, put new battery and immo light flashing.
Read hc05 and made t5 with zed bull, still the same

If i fill 93c46 with FF FF will this be immo off? and do i need to doctor starter circuit too?

ps, i think owner may have tried to start car with red key, will this give me my symptoms? (immo light flashes faster with red key and flashes slower with black key)

ninja

**Meat-Head** · 27th May, 2012, 01:40 PM

THAT'S SO UNFAIR - I WANT ONE OF THEM DO DO - STOMPS FEET ON A MARDY

Right, *THINK* if you look at the immo box, with the wires facing your body *THINK* top right black/blue bottom right black - use a finest quality scotchlock, that's your starter cut done.

then in engine ecu - passenger foot, daughter board, remove the oki????? read as a 93C46

JUST FF OFF PAL.

REFIT, and should - hi-ho silver away.

if that don't start, you can keep it.

Might be helpfull look for threads by member Fallen - type in "oki"
i linked and spammed a thread.

how did you read the hc05? direct wires, lift pin?

**Meat-Head** · 27th May, 2012, 01:44 PM

http://www.digital-kaos.co.uk/forums...59/#post461047 - please spam and quote in that thread if it worked

http://www.digital-kaos.co.uk/forums...4/#post1301753

http://www.digital-kaos.co.uk/forums...ml#post1406563 - and post below

**d.zio** · 27th May, 2012, 01:53 PM

take out the little ok board

**Meat-Head** · 27th May, 2012, 02:00 PM

Originally Posted by d.zio

take out the little ok board

1) Engine light will be on
2) Here in Ingland ALL warning lights must work for MOT - bastrards
3) IF has V-tec it won't work with MIL on.
4)

OFF TOPIC:-

Ninja mate, i know your into EVERYTHING on here, rumor going around that states using clone Zedbull you can reset and reuse ID48 Fiat
keys, you seen that anywhere, for fetish reasons, *HOPEFULLY* got one to do on Tuesday

Thanks

Meat

**d.zio** · 27th May, 2012, 02:17 PM

thanks meaty for your comments about mil and england but this ecu is non vtec

**Meat-Head** · 27th May, 2012, 02:46 PM

Originally Posted by d.zio

thanks meaty for your comments about mil and england but this ecu is non vtec

Well, if you can do something to make yourself look cool down the pub, then do so.

You could walk into the pub and say:-

1) I snapped the daughter board off and ~~~~e it off

OR

2) I removed the OKI ??? EEPROM, read it as a 93C46 -then reinstalled it, and job was a carrot.

**ninja123** · 27th May, 2012, 05:13 PM

thanks for your input, will mil be on if FF FF off'd?, or is that only if removed the board?
And 93lc46a is a microwire eeprom, no signs of oki anything in here???

Ill check fiat thingy in a bit mate, but dont think so...........

ninja

**ninja123** · 27th May, 2012, 05:39 PM

clone zed bull cant unlock a used id 48 fiat, as it is a 'magic 1', but it can do magic II ones ok, dont know about ori zed.

removed hc and used xprog mate

ninja

**Meat-Head** · 27th May, 2012, 07:01 PM

Originally Posted by ninja123

thanks for your input, will mil be on if FF FF off'd?, or is that only if removed the board?
And 93lc46a is a microwire eeprom, no signs of oki anything in here???

ninja

Sorry because i'm mardy that this is your job and not mine, you will have to just look up the a on that 93lc46a - a means something. Can't remember what, so i'll just say i'm mardy.

Intreasting how it's an microwire.

MIL - no idea, but will be nice to know.

OFF TOPIC:-

Originally Posted by ninja123

clone zed bull cant unlock a used id 48 fiat, as it is a 'magic 1', but it can do magic II ones ok, dont know about ori zed.
ninja

DAMM IT - you found that out, i gave up on, you got a link?

**ninja123** · 27th May, 2012, 08:04 PM

a link to what m8??

**Meat-Head** · 27th May, 2012, 08:19 PM

Originally Posted by ninja123

a link to what m8??

POST 3 OF THIS THREAD

http://www.digital-kaos.co.uk/forums/f178/honda-civic-immo-plug-94659/#post461047 - please spam and quote in that thread if it worked

http://www.digital-kaos.co.uk/forums/f178/97-honda-prelude-immo-off-234464/#post1301753

http://www.digital-kaos.co.uk/forums/f178/97-honda-prelude-immo-off-234464/index2.html#post1406563 - and post below

**ninja123** · 28th May, 2012, 05:47 PM

Put all FF FF to eeprom, fitted to car and tried black key first, with immo box off - not working.

Put immo box on, tried black key, not working.

Tried red key - black key - black key - red key, not working.

Snapped little pcb off and bridged black/blue & black wires from immo, left immo box off - WORKING!!

MIL stays on (removed bulb).

Thanks for help guys, but next time, I wont be FF ing around

ninja

**Meat-Head** · 28th May, 2012, 06:38 PM

Originally Posted by ninja123

Snapped little pcb off and bridged black/blue & black wires from immo,

Like it, you snapped one off in works time.

Assuming you did join the black and black/blue wires with immo unit unplugged?

Was it 100% correct in colors and location?
Do you have to pretend it's a diesel now - wait before starting.

Shame you gave up easily.

**ninja123** · 28th May, 2012, 08:30 PM

WHAT YOU MEAN?? GAVE UP EASILLY??

As usuall, this car was miles away, so when i got there, i was a little pissed when didn't start first time!!

Wiring almost right, on top row, black/blue is second from right, black underneath in first position.

MIL is now glow plug light!!!

Oh, and 'SNAPPED' is a term for desoldering, when pissed off in 27 degree sunshine with a 'still' non runner!!

Have you ever SNAPPED??

ninja