Daewoo / Chevrolet Kalos 1.4 16V hybrid immo off

**kwansterp** · 23rd August, 2012, 10:42 PM

Hi all

I have a problem with the car, not fires. Red light next to the clock.
Is it possible to permanently remove immo?
Hybrid ECU has the numbers:
Daewoo / Chevrolet Kalos 1.4 16V
XAHD PF 96417551
MR140

Here are some pictures driver.

Thank you in advance for your help.

**Meat-Head** · 23rd August, 2012, 11:50 PM

Would like to say AHHH WICKED.

Dobut it very very much.

**rkaton12** · 24th August, 2012, 06:32 PM

read memory nr1 st95020

**bursuc** · 26th September, 2012, 12:35 PM

someoane has immo off solution for this ?

**kwansterp** · 26th September, 2012, 03:03 PM

Hi

I used an emulator, which plugged into the driver installation. Soldering hybrid forgave myself to avoid damage.

**sepistar** · 9th January, 2013, 01:08 PM

Originally Posted by kwansterp

Hi all

I have a problem with the car, not fires. Red light next to the clock.
Is it possible to permanently remove immo?
Hybrid ECU has the numbers:
Daewoo / Chevrolet Kalos 1.4 16V
XAHD PF 96417551
MR140

Here are some pictures driver.

Thank you in advance for your help.

woder how did you open this ecu?
have one here that when outside are cold,the car started only when i warm up the ecu.
have you guys an idea what could be?
regards

**Meat-Head** · 9th January, 2013, 07:21 PM

Originally Posted by sepistar

woder how did you open this ecu?
have one here that when outside are cold,the car started only when i warm up the ecu.
have you guys an idea what could be?
regards

knackered.

did have an Opel Astra simular it was faulty capacitor.

**zanovo** · 9th January, 2013, 11:06 PM

To kwansterp:
If you can fined the tool to read CPU Flash (no nead to open ECU), I can help you to correct it as IMMOoff.

**Anmed** · 10th January, 2013, 10:10 AM

Correctly. There are tools to work with these ECU. Available noimmo flash. Not sure, but maybe available in this place delcohacking.net • Index page
Other tools are sold in Russia and Ukraine.

**kwansterp** · 10th January, 2013, 12:04 PM

No need to open the ECU to remove immo. Just hook the cable emulator with ECU or at the very immobox under the steering wheel. I personally opened the ECU because I do not know the solution yet. Next time without interfering with the hybrid.
https://carlabimmo.com/en/28-daewoo-2.html

**javiercj** · 15th January, 2013, 03:41 AM

Originally Posted by zanovo

To kwansterp:
If you can fined the tool to read CPU Flash (no nead to open ECU), I can help you to correct it as IMMOoff.

hello zanovo

please can i help me.

i have the unit(uce) chevrolet kalos

Ii is possible cancel to immo?

ref of unit: 90388019dlby-fwdlbys012220017

**javiercj** · 16th January, 2013, 10:04 AM

Originally Posted by kwansterp

Hi

I used an emulator, which plugged into the driver installation. Soldering hybrid forgave myself to avoid damage.

how do you do the Soldering hybrid?

**kwansterp** · 16th January, 2013, 10:38 AM

In the middle of the driver did not have to solder anything, do not even need to open the ECU.
Go to page: https://carlabimmo.com/en/28-daewoo-2.html
download file daewoo 2 en.pdf, the entire installation wiring instructions on page 7
Pinning Emulato the driver, or the immobox, as you prefer.

Company Carlabimmo is Polish, but they sell all over Europe

Regards

**dyzio** · 23rd June, 2014, 09:51 AM

hey how u connect emulator to immo? instruction is to connect 10 8 and 5 pin in my immobox is only 7 pins

**kwansterp** · 23rd June, 2014, 10:44 AM

I plugged into the ECU harness. Outside they emulator mounted next to the driver.
Similarly, as shown on page 7:
http://www.autotronika.pl/files/file...le_add-109.pdf