need help with 08 audi R8

**cklair** · 23rd August, 2014, 04:00 AM

I bricked the 2008 audi r8 dashboard with digiprog .car blong to my friend and I was bit hesitant to do it with this tool.it read the km ok when I put the new value dash go dead.tool ask to turn the key off and then on it ddi few times,i scan the car all other module in the car setting code for instrument not comuncation and with scanner I cannot comunicate with dashboard.if I hook the digi it reads the dash as 0km.i did not try to put any value.i did disonect the battery for 5 min.
car no start.what eprom or chip it got.can it be repaired thru avdi or carprog?has somebody have dash removal instruction too.
anty help I would appricate thabks

**honingkoning** · 23rd August, 2014, 07:34 AM

Originally Posted by cklair

I bricked the 2008 audi r8 dashboard with digiprog .car blong to my friend and I was bit hesitant to do it with this tool.it read the km ok when I put the new value dash go dead.tool ask to turn the key off and then on it ddi few times,i scan the car all other module in the car setting code for instrument not comuncation and with scanner I cannot comunicate with dashboard.if I hook the digi it reads the dash as 0km.i did not try to put any value.i did disonect the battery for 5 min.
car no start.what eprom or chip it got.can it be repaired thru avdi or carprog?has somebody have dash removal instruction too.
anty help I would appricate thabks

Try to perf flash repair with digiprog.
Its a common failure on this dashes, if this not work you can try someone with Enigma,DP3, MDC.
In the worst case you must remove dash and repair flash in micronas CPU.
I never tried but xprog claims to R/W micronas.

But first try to repair it with flash repair through diag.

Wbr Adam.

**cklair** · 23rd August, 2014, 07:55 AM

should I write back with digiprog and try as it shows only 0km.avdi will work on this dashto repair dump?

**vageric** · 23rd August, 2014, 08:02 AM

write new valeu again with digiprog

**honingkoning** · 23rd August, 2014, 08:34 AM

Originally Posted by cklair

should I write back with digiprog and try as it shows only 0km.avdi will work on this dashto repair dump?

Your dash is totally dead right Or does it show you 0.

If its totally dead perf flash repair from your digi.

**cklair** · 23rd August, 2014, 04:20 PM

it shows nothing .how can I do flash repair?can I do it on bench?what mcu/chip it has? thanks

**vageric** · 23rd August, 2014, 04:34 PM

did you tryed write again with digiprog?

**cklair** · 23rd August, 2014, 10:44 PM

thanks vageric,as you suggested I write back with digiprog and dash come back to life

.i did not understand the logic.no scan tool will comuncate with dash but digi only.i left the battery disconnected overnight and this moring same thing dead. but when I write the km back again instrument lights come back on everything worked it should be.i thanks all you guys who tried to help me by giving me there input.great input.

thanks.
this is first vag car did to me never happened befor .