Alfa Romeo 159 - What tool to match key via OBD

[simaservis1108]

Hi guys,

So as I have unprogrammed keys that are have been unlocked previously,and 2 new ones.
I have pulled the trigger and contacted Bogi about TMPro2 and it's module 118.
Bogi assures me the remote will work,but there is another problem.
TMPro2 only prepares the transponder but doesn't add it to dump.
Can anyone tell me what tool can program this via OBD?
SBB can't,Launch says it can,but it can't(tested).

Regards,
Sima

[salkapone]

................

[armpower]

HAllo Sima

AVDI can prepare the pcf7936 with bcm dump and modify the dump adding the key.
By the way I haven't tested it, i've only taked a look in the key programming function.
AVDI can't do 159 key programming via obd but Fiat croma is in the list of car programmable via obd.
The two system are similar because have TRW teg reader (different shaped).Maybe wort a try.
I think Texa axone Pad can do the key programming.Tomorrow morning i'll take a look.
I've a couple of 159 used key i want to reuse.How can i unlock the pcf?
Have you sent the key to someone capable to unlock these keys?
I have also some Croma keys.
Can you provide me some more info?
Many thanks.Your help and your info are very useful.

[malczykos]

MVP Pro can program this keys.

How You unlock this key? Pls share solution!

[paul_12345]

MVP Pro can program this keys.

How You unlock this key? Pls share solution!

its been posted several times - fresh car keys

[simaservis1108]

As paul said,or get a matching set from crashed car with body computer,and I will unlock it for you.

[Fallen]

I don't see any listing for Alfa keys on fresh car keys site.

[paul_12345]

I don't see any listing for Alfa keys on fresh car keys site.

I would email them m8, think they are cautious about saying which keys they can do with remote still working.

[HeXeN]

BUMP.
What tool to program it by OBD?

[jodge]

multieuscan

[vasa]

hi alfa 159 key (card) is precoded and locked for your car .You can after adapt with diag and PIN code. (Delphi ds150) can do it. But in this moment not exist data for PCF remote section. You can only add ID46 transporter. Don't write new files to BCM need learning too in key reader. Is better bay on scrapi old bcm with keys addapt to car. New key on Alfa dealer coast 400 euro.

[HeXeN]

Do you know if TMpro2 can do remote key from dump?

[Cromwe11]

Do you know if TMpro2 can do remote key from dump?

No it can’t, will make a working transponder to start but no remote functions.

[vasa]

Hi i know where is remote and trasporders data in mototola dump you can bay key with BCM write remote data to old BCM. Transporter data can't write to BCM .Need prepared ID46 and learning OBD . On key remove coil for charging PCF and put ID46. im write this moment none tool cant prepare PCF for remote. don't waste your time

[ivaylomezdra]

I have tmpro2 and module 118 and i can say - Bogi is the best Tmpro2 also , i reset key by tmpro precoded by dump 24lc04 , remote not work , but when i learn key by pincode to car by xhorse keytool plus , remote start working!!! I can confirn tmpro2 is the best choice for alfa 159 fiat croma , brera , spider and for a lot of other brands !!! Have big support , i burn eeprom 24lc04 before i read , and call Bogi owner tmpro2 and he tell me dont worry i will make file for you just send me bsi dump , i send to him and after 20 min i get worked file and all was perfect in alfa 159 car start (akl situation) prelearn key by pincode from tmpro and remote start work also!!!