Oh the usb reset...Been a while since i used that...If I recall correctly you replace lib file with one in d/l folder unlockok.exe and go to internet update and that shold be it.
Oh the usb reset...Been a while since i used that...If I recall correctly you replace lib file with one in d/l folder unlockok.exe and go to internet update and that shold be it.
try download put unlock exe file and lib file only in one folder.open exe file and hit upload...that should be it..
DashProg (22nd September, 2015)
My eeprom adapter
IMG_20151010_224331.jpg
ecufix (16th April, 2020), fuktak (1st November, 2015), FxShaw (11th October, 2015), philipcoin (10th October, 2015), Yhoni (21st September, 2019)
FxShaw (11th November, 2015)
Very nice kalosbg.. Here is mine..I had modify my D1 to read Dip/Soic/tssop/mssop..
home made
Inside: spaghetti IMG_20151011_115502.jpg
Last edited by kalosbg; 11th October, 2015 at 09:59 AM.
Carprog was unable to read because external voltage was below 8v. Lots on internet about this, but is there a repair or, just connect 12v external supply? New to carprog, so any help would be appreciated.
carprog.jpg This is my eeprom adaptor home made for carprog
Nothing will remain in this World , Everything will come to END!
THINK POSITIVE NOTHING IS IMPOSSIBLE
Please do not spam by PM asking for help. Use forum, that is why we are here.
very nice jobs
Where is suggested to purchase carprog clone? What are the limitations?
check here www.gocardiag.com
Everything will be back in order - All my respects to DK's members.
someone have success reading delco mt35e with clone?
i use a clone with codecard repair kit and original a1 cable, i can connect and read opel edc16 can, so i think that can line work ok, but i can't connect on bench with delco mt35e ecu, tried several times, also with 12+ external carprog supply
Bookmarks