Kess V2 5.017 Bosch EDC16C35

[MartinF1]

Hello did anyone tried to read/write EDC16C35 with kess v2 5.017 clone?
I am just wondering because I had some problems with MPPS concidering writing this ECU.
BMW E87 120d, 163hp to be particular
Thank you
BR

[dudus8]

Yes, Read/Write OK with Kess.

[huskypt]

Hello did anyone tried to read/write EDC16C35 with kess v2 5.017 clone?
I am just wondering because I had some problems with MPPS concidering writing this ECU.
BMW E87 120d, 163hp to be particular
Thank you
BR

I Read/write by MPPS and read/write by kess always no problem ... checksum correction OK

[AudiA53xxx]

I Read/write by MPPS and read/write by kess always no problem ... checksum correction OK

Do you manage to write on K-Line with 225 Ohm or how, because I saw many people fail writing this ECU with Kess V2 5.017

Thanks


Gesendet von iPhone mit Tapatalk

[damjantuze]

No problem with kessv2 clone on that ecu mpps is shit u can brick ecu

[figani]

No problem with kessv2 clone on that ecu mpps is shit u can brick ecu

There are many threads/posts with users of Kess Clones and problems with writing on that kind of ecu´s...
and also with power suply...

[damjantuze]

Some of the clones works perfect some dont work dont know i got friend he bought kessv2 clone red and its not r/w some ecu he got problems
in my opinion kess 4.03 is best i never got problem with red 5.017 i got on some cars

[Lambda1]

For EDC16C31 and EDC16CP35 I would done backup via ktag first.
you also can write with ktag via bdm... works fine at both. For Kess clone I wouldnt be sure...

[AVDigitale]

in bmw cars always good power supply to battery 13.5-14v and never problem to this cars
edc16c31,c35 and cp35 all going good over obd and with kess or mpps

[AudiA53xxx]

Hello,

today I tried it out, connect a good Battery Charger my Battery was at 13.1V and first Full read with Kess and than Write with kess.

Read 34 Minutes

Write 5-7 Minutes

Usw K-Line on E92 335D and in Options you have tu usw 225 OHM write speed.

I hope this help some People.


Gesendet von iPhone mit Tapatalk

[AndreiCRT]

Yes, this works, stable voltage and pull up resistance set to 225OHM, done with kessv2 clone