BMW F30 MEVD1729 need stock .bin file!!

[Crimper999]

I have two BMW's I'm working on, both are bad DME's. One is a 2013 320i and the other is a 2013 328i I can't clone because original DME's are damaged from opening the case. If anyone has a website I can download the proper files I'd appreciate it. I'm reading them with a CGDI Pro 9S12 and I've been able to extract the password to read the locked chip. I'm open to suggestions as to how to go about repairing these DME's. I know I should just do a FEM ISN extraction, but I don't know which chip I extract the ISN from and how I could write the ISN to the chip? I have EU clone of KESS, I seen KSuite3.10 up can do virtual read, but I don't know how to get the tools to work with my computers. Thank you in advance!

I'll post the files if that's what I need to do. I'm willing to pay a download site for the stock original files too.

[Lambda1]

Read ISN by CGDI (should support this one). Than use key... to read ISN of FEM and Change to the one from ECU.
Use search function to get what to need... and I cant recommend to use clone tool stuff for this job.

And to be kind... with clone kess you cant do anything real at this ecu.

[Crimper999]

I agree if I had CGDI BMW tool, I have the CGDI PRO 9S12. So I have to just write virgin original flash .bin file back in and I should be ok

[Lambda1]

Okay, so you need other tools for.
Like VVDI BIMTOOL and another tool to read ecu eeprom.

[Crimper999]

Okay, so you need other tools for.
Like VVDI BIMTOOL and another tool to read ecu eeprom.

cgdi pro 9s12 read DME eeprom and flash successfully

[Lambda1]

And than problem is?
Decrpyt ISN and write in Cas. After do the coding stuff because 320i ecu and 328i engine.