does anyone have mk2 focus cluster pinout

[smirnoff_rules]

7M5T 10849 HB . anyone have a pinout , l want to read cluster with fordometer , l only need eeprom so want power , earth and can low and high , thanks

[rafal]

4 , 15 , 32 = + 12v
6 = -12v
17 = can L
18 = can H

[smirnoff_rules]

thanks rafa , have a spare one coming will try it ,, are pins numbers on clock ?

[smirnoff_rules]

perfect , thanks just found this too and your spot on , just can L and H might be different ?

[smirnoff_rules]

e3 technical show can L and h at 22 and 23 aswell ? will tried all and post if its works to help others

[rafal]

22 and 23 it is van network

[kiszka]

e3 technical show can L and h at 22 and 23 aswell ? will tried all and post if its works to help others

................
Attachment 773280

[smirnoff_rules]

l will message E3 and ask them too , l will try auto dat first

[rafal]

anyway - now you have all info ...................

[smirnoff_rules]

l like to be fully prepared , you may have noticed

[smirnoff_rules]

thanks rafal spot on

[rafal]

thanks rafal spot on

no other way by this info as you get

[smirnoff_rules]

anyone been able to read 8V4T-10849-EF l have seen later wiring diagrams and looks the same as above or am l missing something

4 , 15 , 32 = + 12v
6 = -12v
17 = can L
18 = can H

[afonso rico]

is this you need friend ?

anyone been able to read 8V4T-10849-EF l have seen later wiring diagrams and looks the same as above or am l missing something



4 , 15 , 32 = + 12v
6 = -12v
17 = can L
18 = can H

[smirnoff_rules]

thanks l tried the same input but used clock isnt reading on bench must be faulty