hii please i need help with toyota tacoma 2006 immo

[gselectric]

i have this car tacoma car crank but no start it has fault immobliser and p0345 i need to make immo off to try i checked everything wiring harness all ok dumpes off ecu and immo are attached
ecu is ra86 and immo 93c66 i need help thx in previouse ecu number 89661 04b80 denso mcu tdfp01-0106 immo 89780 04010 thx

[gselectric]

any help pleae

[eliet2000]

Try this file, test and report, remember disconect immo box

[gselectric]

thank you so much i will try and report now

[gselectric]

thx sir it doesnt work still b2799 ecu immo

[eliet2000]

thx sir it doesnt work still b2799 ecu immo

Are you disconect immo box ¿?

[gselectric]

yes sir i disconnected it

[Abup]

try with an other ecu bridge method shurt 4 pin and 13 with ignition on for 35 min to 1 hour and try to start your p0341 it can be ecu wiring sensor or mechanical problem in camshaft position .verify timing .

[Abup]

try this immooff without passvord

[gselectric]

thank u sir i checked everything u sayed all ok i will try this dump tomorow and report i have ignition ok what iam missing is injection pulsing when first car crank it gives little pulsing then disappear