VAG-COM/VCDS EVERYTHING

[Nevalite]

Hey guys,

So I am new to all this but I am trying to figure out what I can do with the wire that I have. Here are pics of the PCB:








The chip says ftdi something on it. Now my question is as follows. Can I modify this cable to be used with VCDS 704, 812 or 908? Or is this one of those "dumb" cables? What can I do with this?

Thanks.

[JetSet59]

I look like a old VAGCOM 409, you can use only with K-line.
No chance to use on CAN-BUS

[Nevalite]

I have used it successfully with VAGCOM 409, is that the best I can do with this or is there any better software I should be trying to get? I drive and audi A4 (2000).

[svid]

I have used it successfully with VAGCOM 409, is that the best I can do with this or is there any better software I should be trying to get? I drive and audi A4 (2000).

He will work with VCDS-Lite v.1

[Nevalite]

Yeah I have tried it with VCDS-lite 1.0, the only problem is I dont have an activation key. I heard there was a loader floating around if anyone could PM some details about that it would be much appreciated.

[rsibiza]

Yeah I have tried it with VCDS-lite 1.0, the only problem is I dont have an activation key. I heard there was a loader floating around if anyone could PM some details about that it would be much appreciated.

Try hit "Search" then "VCDS Lite" im sure the loader will fall in your hand very fast....

[Fuchs111kw]

Hi,

I have a few years ago China HEX CAN USB Interface purchased the went really until my computer is broken and I have not found the CD.
Now I'm in my naivety that I should try the latest from Rosstech, has been shown as the VID / PID only fffffff.
Now I'm very happy here you can read the new programmer.
My real problem is that I do not know what I did for a version of the interface
I took a picture maybe someone knows.
Sorry for google translate

[tomasfilip]

Hi,

I have a few years ago China HEX CAN USB Interface purchased the went really until my computer is broken and I have not found the CD.
Now I'm in my naivety that I should try the latest from Rosstech, has been shown as the VID / PID only fffffff.
Now I'm very happy here you can read the new programmer.
My real problem is that I do not know what I did for a version of the interface
I took a picture maybe someone knows.
Sorry for google translate

hehe, unbelievable, another picture of cable from Chinas market and different than others. I guess that I saw in this forum more than 5 pictures of different cables.

Anyway, you cable looks normal. In this forum are everything what you need to download new firmware for all programmable parts, your cable will works with 908 version, finally.


Just make a cup of coffe and start reading

[KenshinPT]

I really love those china adaptions with through hole resistors and diodes. Lovelly

[art64]

hehe, unbelievable, another picture of cable from Chinas market and different than others. I guess that I saw in this forum more than 5 pictures of different cables.

But all cables have ATF16 , MCP,Atmega162,FTDI,GAL16 and.... 7805
I didn't see STC in the last picture.

[Tereksaz]

You talking about firmwear 1.83 but you need ATMEGA dump too and I really don't know that this 10.6.0 it is for free.
So you ned to files to reprogramm Atmega not just 1.83 that you find here in this thread.
BTW dumps for VCDS 10.6.3 for sure dosen't exist.

About dump for Atmega 162:
1. dump for FT232BM -have bootloader 256 word - it is for all old adapter!
2 dump for FT232RL and new version com port - have 512 word - it is for all new version adapter
3. dump ver. 1.78 -183 for FT232BM not same as dump for ver1.78 -1.83 for FT232RL and new com port.
4 dump for com port, dont can use right for USB version , can use only for usb Serial Com Converter + latency timer =2 !!!!!!
and else!
about free damps - make dump very easy.
instructioin!
buy original HEX-COM+CAN interface- it is not many moneys.
install and run HHD software - USB snifer.
connect usb serial com converter and connect HEX-COM+CAN interface.
Run snifer and run VCDS 11.2 or any another version.
Select com port 2 and make test interface.
Closed VCDS and save log file format HTML to snifer.
open file and find all need information -then decript it and write dump.
All time for job - not more 30 min.
And gold key to your hands!
good luck!
=D.S. of M.=

[mattydr67]

About dump for Atmega 162:
1. dump for FT232BM -have bootloader 256 word - it is for all old adapter!
2 dump for FT232RL and new version com port - have 512 word - it is for all new version adapter
3. dump ver. 1.78 -183 for FT232BM not same as dump for ver1.78 -1.83 for FT232RL and new com port.
4 dump for com port, dont can use right for USB version , can use only for usb Serial Com Converter + latency timer =2 !!!!!!
and else!
about free damps - make dump very easy.
instructioin!
buy original HEX-COM+CAN interface- it is not many moneys.
install and run HHD software - USB snifer.
connect usb serial com converter and connect HEX-COM+CAN interface.
Run snifer and run VCDS 11.2 or any another version.
Select com port 2 and make test interface.
Closed VCDS and save log file format HTML to snifer.
open file and find all need information -then decript it and write dump.
All time for job - not more 30 min.
And gold key to your hands!
good luck!
=D.S. of M.=

I'm really impressed.
Please give me an hour to do this I can't do it so quiclly, please.
Good luck

[rsibiza]

About dump for Atmega 162:
1. dump for FT232BM -have bootloader 256 word - it is for all old adapter!
2 dump for FT232RL and new version com port - have 512 word - it is for all new version adapter
3. dump ver. 1.78 -183 for FT232BM not same as dump for ver1.78 -1.83 for FT232RL and new com port.
4 dump for com port, dont can use right for USB version , can use only for usb Serial Com Converter + latency timer =2 !!!!!!
and else!
about free damps - make dump very easy.
instructioin!
buy original HEX-COM+CAN interface- it is not many moneys.
install and run HHD software - USB snifer.
connect usb serial com converter and connect HEX-COM+CAN interface.
Run snifer and run VCDS 11.2 or any another version.
Select com port 2 and make test interface.
Closed VCDS and save log file format HTML to snifer.
open file and find all need information -then decript it and write dump.
All time for job - not more 30 min.
And gold key to your hands!
good luck!
=D.S. of M.=

Isnt data encripted between interface and pc? I tought that sniffing the Hex Can this way would no more work?

How to edit dump from sniffed data? Any explaintions pls?

[Tereksaz]

Isnt data encripted between interface and pc? I tought that sniffing the Hex Can this way would no more work?

How to edit dump from sniffed data? Any explaintions pls?

for example:
need decode this array:
4D 2C 0B D9 C5 C1 8D E9 95 51 DD 8A 3A 58 59 70 80 4E 9B A3 F2 A7 81 45 C5 78 48 54 CE 25 9F A8 E9 EC 45 93 A5 97 FF F9 2A 21 EF 12
4D 2C 0B D7 2B 6F E3 C7 5B DF 93 89 EE CC BC 31 D4 27 55 A5 D1 E8 B1 ED 4F 6B C9 09 70 5B 88 89 41 EA 86 FE 4E 46 9C 2C 14 68 22 71
4D 2C 0B 5D 79 E5 61 AD 89 B5 F1 71 27 4A D7 AB 75 C5 24 5E 0C 8B 3B 7D 11 C7 1D 86 E0 5D 24 0E FB 5A 76 EF AC C3 4F 82 48 C3 FD F7
4D 2C 0B E3 C7 5B DF 93 B7 8B 4F 4D CE FC 59 22 58 3D F9 CB 4D 15 58 A7 6C 64 C2 33 88 3C 17 F8 E0 20 F6 67 52 BF 0D E0 CD 12 2F DD
4D 2C 0B 69 15 D1 5D 79 E5 61 AD 54 02 EC 7F 50 A3 B9 3B 5E DE 38 ED CD 30 C8 D3 B9 17 2E 84 35 4A 95 EA 85 8F D3 20 E1 88 BA 57 B4
4D 2C 0B BC 8C 1C 6C 7C 4C DC 2C 55 F9 AF 74 AD F8 BC 35 30 03 9B 57 74 35 DB 82 11 0A 2A C4 95 A4 8B 33 2F A2 9D 95 18 FA B1 ED E1
4D 2C 0B DC 2C 3C 0C 9C EC FC CC 49 2C 3A 46 6F 65 0D C4 8A 93 40 B1 42 5B 17 00 9D 61 A5 64 8E 72 BC 89 A3 62 08 A8 A8 69 9B 77 6E
4D 2C 0B 95 51 DD F9 65 E1 2D 09 DC 82 D8 EB 57 1F 08 78 B5 B5 93 CF CF 28 DE F9 17 59 4C DF EB 2B 99 BF 34 78 F7 02 BA C5 B6 DA 72
it is all eeprom for atmega 162.
64-bit key, different each time!!!!!!!!!!!!!!!!

[blackpirate]

for example:
need decode this array:
4D 2C 0B D9 C5 C1 8D E9 95 51 DD 8A 3A 58 59 70 80 4E 9B A3 F2 A7 81 45 C5 78 48 54 CE 25 9F A8 E9 EC 45 93 A5 97 FF F9 2A 21 EF 12
4D 2C 0B D7 2B 6F E3 C7 5B DF 93 89 EE CC BC 31 D4 27 55 A5 D1 E8 B1 ED 4F 6B C9 09 70 5B 88 89 41 EA 86 FE 4E 46 9C 2C 14 68 22 71
4D 2C 0B 5D 79 E5 61 AD 89 B5 F1 71 27 4A D7 AB 75 C5 24 5E 0C 8B 3B 7D 11 C7 1D 86 E0 5D 24 0E FB 5A 76 EF AC C3 4F 82 48 C3 FD F7
4D 2C 0B E3 C7 5B DF 93 B7 8B 4F 4D CE FC 59 22 58 3D F9 CB 4D 15 58 A7 6C 64 C2 33 88 3C 17 F8 E0 20 F6 67 52 BF 0D E0 CD 12 2F DD
4D 2C 0B 69 15 D1 5D 79 E5 61 AD 54 02 EC 7F 50 A3 B9 3B 5E DE 38 ED CD 30 C8 D3 B9 17 2E 84 35 4A 95 EA 85 8F D3 20 E1 88 BA 57 B4
4D 2C 0B BC 8C 1C 6C 7C 4C DC 2C 55 F9 AF 74 AD F8 BC 35 30 03 9B 57 74 35 DB 82 11 0A 2A C4 95 A4 8B 33 2F A2 9D 95 18 FA B1 ED E1
4D 2C 0B DC 2C 3C 0C 9C EC FC CC 49 2C 3A 46 6F 65 0D C4 8A 93 40 B1 42 5B 17 00 9D 61 A5 64 8E 72 BC 89 A3 62 08 A8 A8 69 9B 77 6E
4D 2C 0B 95 51 DD F9 65 E1 2D 09 DC 82 D8 EB 57 1F 08 78 B5 B5 93 CF CF 28 DE F9 17 59 4C DF EB 2B 99 BF 34 78 F7 02 BA C5 B6 DA 72
it is all eeprom for atmega 162.
64-bit key, different each time!!!!!!!!!!!!!!!!

Wow!

speechless!

10q

edit 1:
till i find a version of hhd software cracked, can anyone try with USBTrace ???

i think it have same features!

cheers